EKOFLUX S flanged shut-off and balancing valve IVAR BRA.EKOFLUX S DN 50 (EKOFLUX.S050)

Code: EKOFLUX.S050
Not rated Rating details
634,68 € –20 %
Prírubový uzatvárací a vyvažovací ventil - séria EKOFLUX S - DN 50; Kvs 55,6m3/h
634,68 € –20 % 507,74 € / pcs 412,80 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Valve EKOFLUX.S050 from the BRA.EKOFLUX S series by IVAR balances the flow in the main circuits or individual branches of heating and air-conditioning systems. Balancing removes uneven supply to the consumers, which can cause noise and stress components, and so improves comfort and energy use. Besides shutting off and measuring, continuous presetting lets you control pressure loss and flow.

Technical data

  • Nominal size DN: 50
  • Kvs value: 55.6 m³/h
  • Max. pressure: 16 bar (PN 16)
  • Medium temperature: −10 °C … +120 °C
  • Body material: grey cast iron GJL 250
  • Seal: EPDM
  • Surface finish: epoxy coating RAL 5002
  • Flanges: PN 16 (EN 1092-1)
  • Medium: water and water-glycol mixtures up to 50 %

It can be installed on both the supply and the return pipe. It suits water and water-glycol mixtures up to 50 %, but not steam, gases or liquids containing oils and hydrocarbons. The valve can also serve as a pressure source for the EKOFLUX DPCV regulator. Installation should be left to a qualified company.

Technical data

CodeEKOFLUX.S050
ManufacturerIVAR
TypeBRA.EKOFLUX S
Nominal size DN50
Kvs value55.6 m³/h
Max. pressure16 bar (PN 16)
Medium temperature−10 °C … +120 °C
Body materialgrey cast iron GJL 250
SealEPDM
Surface finishepoxy coating RAL 5002
FlangesPN 16 (EN 1092-1)
Mediumwater and water-glycol mixtures up to 50 %

Frequently asked questions

Where is valve EKOFLUX.S050 installed?
On the supply or the return pipe; the manufacturer does not prescribe a side.

Which medium may flow through the valve?
Water and water-glycol mixtures up to 50 % at pressures up to 16 bar. Do not use the valve with gases, steam, oils, hydrocarbons or hazardous, corrosive or abrasive liquids.

Can the valve be used with the DPCV pressure regulator?
Yes, it allows the pressure to be passed on to the EKOFLUX DPCV regulator.

Additional parameters

Category: BRA.EKOFLUX S - shut-off and balancing valve
Warranty: 24
Code: EKOFLUX.S050
Manufacturer: IVAR
Type: BRA.EKOFLUX S
Nominal size DN: 50
Kvs value: 55.6 m³/h
Max. pressure: 16 bar (PN 16)
Medium temperature: −10 °C … +120 °C
Body material: grey cast iron GJL 250
Seal: EPDM
Surface finish: epoxy coating RAL 5002
Flanges: PN 16 (EN 1092-1)
Medium: water and water-glycol mixtures up to 50 %

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.