BRA.F15.100 PN10/16 - Flanged pressure reducing valve

BRA F15.100 flanged pressure reducing valves reduce and stabilise the pressure in larger water and compressed air distribution systems regardless of flow rate and inlet pressure fluctuations. The DN 80 PN 10/16 valve made of ductile iron with epoxy coating and NBR seals allows the outlet pressure to be set at 1.5–6 bar, has a Kv of 72 m³/h and an overall length of 310 mm.

Bestsellers

 (–20 %)
2 736,50 €
(2 224,80 € excl. VAT)

Product sorting

1 items total

List of products

Prírubový redukčný ventil BRA.F15.100 DN 80, PN 10/16, stavebná dĺžka 310 mm
–20 %
2 224,80 € excl. VAT
2 736,50 €

Direct-acting piston pressure reducing valve with DN 80 flanges for water and...

F15100080

Listing controls

1 items total

FLANGED PRESSURE REDUCING VALVE

BRA.F15.100 PN10/16
 
  • max. pressure 16 bar, installation between flanges PN 10/PN 16 according to STN EN 1092-1
  • T = 0 °C to max. +70 °C
  • for heating and air conditioning (HVAC), water piping, compressed air
  • material – body: cast iron GJS 450-10, spring: stainless steel 55SiCr6, seal: NBR
  • outlet pressure in the range of 1.5 to 6 bar (blue spring)
  • installation only in horizontal piping
  • a filter must be installed upstream of the pressure reducing valve
  • outlet pressure 5 – 12 bar available on request

sktl_bra.f15.100 pn10_16 czver

sknavod_bra.f15.100_přírubový redukční ventil czver

skost_prohlaseni výrobce čl. 4.3.

Vytvořil Shoptet | Design Shoptak.cz.