Flexible Low - Floor drain with edge for perforated grid and adjustable wall flange, length 850mm

Product detailed description

Length: 850 mm. 

Application:
For use inside buildings
For floor-level drainage of showers
For direct installation against the wall
For perforated stainless steel trays
For barrier-free access
For areas with limited floor construction height

Features:
Floor drain made of stainless steel (corrosion resistance by passivation, electrochemical passivation)
Adjustable vertical sealing strip for tiles with thickness 6 - 12 mm
Construction height from 55 mm
Vertically adjustable
Trap permanently connected to the channel - 100% watertight
Self-adhesive tape for high-quality waterproofing
Mechanically cleanable trap up to the waste pipe
Strip and inlet protected by film, basin with polystyrene insert
High flow rate enabled by two trap chambers
Facilitates floor runoff
Better and safer insulation transitions from floor to wall
25-year warranty
Channel material: stainless steel AISI 304, DIN 1.4301, ČSN 17240
Trap material: polypropylene

Scope of delivery:
Channel assembled with trap
Mounting set: screw Ø6x50 - 2 pcs, washer Ø10 - 2 pcs, screw Ø4,2x38 - 3 pcs, washer Ø8 - 3 pcs
Self-adhesive waterproofing tape
Protective film for channel gutter and inlet to trap
Installation cover for the channel
Fixing material for adjustable feet: screw M6x12 - 2 pcs
Rod is not part of the delivery!

Technical parameters:
Trap seal height 28 mm
Flow rate 32 l/min
Trap resistance to pressure 575 Pa
Waste pipe diameter 40 mm
Minimum concrete thickness 55 mm
Total construction height 70-96 mm
Adjustment range of strip 10-15 mm
Load class K3 300 kg

Standards: EN 1253.