HAKL MK SET 3.5kW hand dryer with lever switch, 18cm

Product detailed description

BASIC PROPERTIES

• installation on non-pressurized and standard water taps
• pressure operation up to 6 bar with switching from 0.4 bar
• electronic switching with control unit
• connection to 230V, at 3.5kW directly into the socket
• instant and continuous water heating up to 43 °C
• one power stage of heating coils
• higher water protection class IP 45
• electronic double-stage protection against coil overheating
• hydraulic protection against overheating of the heating system

PRODUCT DESCRIPTION

The flow water heater HAKL MK-1 can be installed not only above or under the sink and kitchen basin, but also directly in the shower area or in the exterior on a summer terrace. The electronic control unit allows installation even in a water supply system with a home water softener that frequently vents air and repeatedly drains the water system.

The heater can also be connected to your purchased tap using plumbing fittings. The electronics detect voltage drops in the electrical grid and notify the user of reduced heating performance by flashing the indicator light. The control unit with two thermal fuses significantly extends the lifespan of the heating coil.

Other specifications are the same as in the HAKL PM-TB model range.

SET - HEATER WITH TAP

For easier purchase, the el. flow water heater HAKL MK SET is delivered together with a wall-mounted, non-pressurized, lever-type basin tap from HAKL, with a 18 cm long spout.
The package also includes a 3/8" sealing washer and a water-saving aerator, which sufficiently aerates the water even at low flow rates, thus visually increasing its volume.

TABLE OF SUITABILITY FOR USE