HAKL MK SET 5.5kW hand dryer with bathroom class, 20cm

Product detailed description

BASIC PROPERTIES

• mounting on non-pressurized and commonly available tap valves
• pressure operation up to 6 bar with switching from 0.4 bar
• electronic switching with control unit
• connection to 230V, at 3.5kW directly into the socket
• instant and continuous water heating up to 43 °C
• one power stage of heating coils
• higher water protection class IP 45
• electronic double-stage protection against coil burnout
• hydraulic protection against overheating of the heating system

PRODUCT DESCRIPTION

The flow water heater HAKL MK-1 can be installed not only above or under the sink and kitchen sink, but also directly in the shower area or in the exterior on a summer terrace. The electronic control unit allows installation even in a water supply system with a home water softener with frequent air intake and repeated draining of the water system.

The heater can also be connected to your purchased valve using plumbing fittings. The electronics detects a voltage drop in the electrical grid and the indicator light flashes to alert the user about the drop in heating performance. The control unit with two thermal fuses significantly extends the life of the heating coil.

Other specifications are the same as in the HAKL PM-TB model range.

SET - HEATER WITH VALVE

For easier purchase, the el. flow water heater HAKL MK SET is delivered together with a non-pressurized wall-mounted basin classic valve HAKL, with a 20 cm long spout arm.
The package also includes a 3/8" sealing ring and a water-saving aerator, which sufficiently aerates the water even at low flow rates and thus visually increases its volume.

TABLE OF SUITABILITY FOR USE