HAKL PL SET 3.5kW water heater with tap switch, 18cm

Product detailed description

BASIC FEATURES

• installation on HAKL pressureless water taps
• pressureless operation at 0 bar with switching from 0.9 bar
• hydraulic activation of microswitch
• connection to 230V, at 3.5kW directly into the socket
• immediate and continuous water heating up to 43 °C
• one performance level of the heating coil
• mechanical protection against coil burnout
• hydraulic protection against overheating of the heating system

PRODUCT DESCRIPTION

The flow water heater HAKL PL is automatically put into operation by turning the hot water valve (tap) on the faucet. The heater has no built-in tank, it heats the water instantly and continuously, with electricity consumption only when hot water is running. A red light on the front cover indicates the activation of the heating.
Due to its design and dimensions, it is intended for only one point of use, for example, on a kitchen sink, a washbasin. Installation is possible only on a special HAKL pressureless water faucet. Such constructed faucets, when the hot or cold water valve (tap) is closed, disconnect the heater from the pressure in the water supply system. This means the heater is not constantly subjected to water pressure, which prolongs its lifespan. A wide range of faucets is supplied together with accessories (gaskets, reducers, heater bracket...) which allow for easy, convenient and quick installation. The flow heater is mechanically protected against coil burnout and overall overheating of the heating system is ensured by hydraulic protection.

SET - HEATER WITH FAUCET

For easier purchase, the electric flow water heater HAKL PL SET is supplied together with a wall-mounted pressureless sink lever faucet HAKL, with an outlet arm length of 18 cm.
The package also includes a 3/8" gasket and a water-saving aerator, which, even at low flow rates, sufficiently aerates the water and thus visually increases its volume.

TABLE OF SUITABILITY FOR USE