HAKL PL SET 5.5 kW hand dryer with classic cabinet, 20 cm

Product detailed description

BASIC FEATURES

• installation on HAKL pressureless taps
• pressureless operation at 0 bar with switching from 0.9 bar
• hydraulic switching of microswitch
• connection to 230V, at 3.5kW directly into the socket
• instant and continuous water heating up to 43 °C
• one power stage of the heating coil
• mechanical protection against coil burnout
• hydraulic protection against overheating of the heating system

PRODUCT DESCRIPTION

The flow water heater HAKL PL is automatically activated by turning the hot water tap on the faucet. The heater has no built-in tank, it heats water instantly and continuously, with electricity consumption only when hot water is running. A red light on the front cover indicates that the heating is switched on.
Due to its design and dimensions, it is suitable for only one point of use, for example, a kitchen sink or washbasin. Installation is possible only on a special HAKL pressureless tap. These taps, designed in this way, disconnect the heater from the water pressure in the plumbing system when the hot or cold water tap is closed. This means the heater is not constantly subjected to water pressure, which prolongs its lifespan. A wide range of taps is supplied together with accessories (gaskets, reducers, heater bracket...), allowing for easy, convenient and quick installation. The flow heater is mechanically protected against coil burnout and overall overheating of the heating system is prevented by hydraulic protection.

SET - HEATER WITH TAP

For easier purchase, the electric flow water heater HAKL PL SET is supplied together with a HAKL pressureless classic wall-mounted tap with a 22 cm long spout.
The package also includes a 3/8" gasket and a water-saving aerator, which sufficiently aerates the water even at low flow rates and thus visually increases its volume.

TABLE OF SUITABILITY FOR USE