Horizontal set Ø 80/125 mm – 1 m - (the set does not include a boiler adapter)
Code: 0020257018Related products
Product detailed description
Horizontal set Ø 80/125 mm – 1 m - (the set does not include a boiler adapter)
Content of the set:
- 1 × exhaust pipe ∅ 80 mm
- 1 × suction tube ∅ 125 mm
- 1 × elbow ∅ 80/125 mm
- 1 x sealing ∅ 80 mm
- 1 × clip ∅ 125 mm x 70 + connecting material
- 1 × external plastic rose
- 1 × internal plastic rose
Total length: 1 m
Pressure loss: 1.5 Em
Note: Used in the case of a horizontal outlet through a wall. Does not include flue adapter ∅ 80/125 mm.
Adapter for flues Ø 80/125 mm A25K (for boilers Gepard Condens, Lev 25 KKZ90, Lev Heliotwin)
Adapter for flue pipes Ø 80/125 mm A25KP (for Tiger, Panther and Puma boilers)
Frequently Asked Questions
- How can I check that the "Protherm horizontal set 80/125 mm S25KZ - 1m (the set does not include a boiler adapter)" fits my appliance exactly? The most reliable way is to compare the exact type/catalogue designation on your appliance's (boiler, tank, water heater) rating plate with the compatibility stated directly in this product's name (brand PROTHERM) and in its technical parameters above. If in doubt, send us the exact type designation of your appliance (including the serial number, if available) - we will be happy to verify compatibility for you.
- Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors, or safety components (safety valves, thermal fuses) are usually dimensioned precisely for the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - an incorrect part can cause reduced function, leaks, or, in the case of safety components, a genuine safety risk.
- Must installation of this part be carried out by a professional? For simpler mechanical parts (e.g. seals, covers, minor accessories with no connection to electricity, gas, or pressurised components), a handy homeowner can usually manage the replacement after disconnecting the appliance from power and the utility connections. For any intervention in the gas, electrical, or pressurised part of the appliance (e.g. sensors located directly in the combustion chamber, safety valves, electronic modules), however, we always recommend a service technician - especially since such an intervention could affect the validity of the appliance's warranty.
- How do I know this part is worn and needs to be replaced? Common symptoms include visible wear/cracking (for seals and rubber parts), a water or flue gas leak at the part, an error message on the control display (for sensors and electronic modules), or a noticeably reduced function of the appliance (e.g. irregular combustion for burner parts). If in doubt, it is safest to have the condition assessed by a service technician during the regular annual inspection.
- Is it worth keeping this part at home as a spare/service item? For parts that are subject to normal wear (seals, fuses, small mechanical parts) and whose failure would mean an interruption to heating or hot water, keeping a spare on hand is a reasonable precaution - especially for an older appliance, for which the part may be harder to source quickly.
Additional parameters
| Category: | Protherm |
|---|---|
| Warranty: | 2 years |
| Diameter: | 80/125 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The company Protherm Production is part of the Vaillant Group and is a manufacturer of heating technology for many countries in Europe, Asia and Africa. For the Slovak market, it produces boilers of the Vaillant and Protherm brands. Protherm Production is not only a production plant. It also includes one of the most modern research and development centres, a testing centre and a distribution and logistics centre for Central and Eastern Europe.
The company's beginnings date back to 1991, when it operated as a seller of heating technology in Prague. Production in Skalica was initially launched in the company Didaktik, from where it was moved to the premises of the current plant in 1999. Since 2001, it has been part of the German Vaillant Group.
Three Slovak entities: The Vaillant Group employs more than 1,800 people in Slovakia. In addition to the plant in Skalica, it also owns the company Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces hydraulic modules and pipes. The sales organisation for the Slovak market is the company Vaillant Group Slovakia, which also ensures further customer care and servicing of the products offered.
The Vaillant Group has a history of over 140 years and more than 2,000 patents. It is a leader and pioneer in the field of heating technologies in Europe. It has 10 production plants worldwide (eight in Europe, one in Turkey and one in China) and more than 12,000 employees. It produces equipment under the brands Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm and Hermann.
Milestones in Protherm Production 2017 – Record: half a million products produced in 2017
2016 – Opening of the new visitor centre
2015 – Opening of the new testing centre
2013 – Creation of the central logistics warehouse East Hub
2011 – Launch of production of suspended non-condensing boilers
2005 – Specialisation in all stationary boilers
2001 – Integration into the German Vaillant Group
2000 – Start of production with three assembly lines
Production
Protherm Production produces a wide range of boilers and hot water heating equipment. These include suspended and stationary, condensing and non-condensing boilers, electric boilers, electric water heaters for hot water preparation and indoor units of heat pumps. Products of the following brands are produced at the plant in Skalica:
The most modern electronic work processes are used in Protherm Production, which makes it relatively easy to assemble heating equipment on the production lines. The work process on LCD screens guides employees through the entire assembly process, in both text and visual form. This intelligent electronic system makes production easier and helps avoid errors. In the case of incorrect use of components, it alerts us and stops the assembly of the product on the line.
The production halls of the plant in Skalica are bright, clean and quiet spaces. The goal of Protherm Production is to become a green production facility, so it invests significant financial resources into ecological solutions, innovations and focuses on energy saving.
Research and development centre
One of the most modern research and development centres in Europe is part of Protherm Production. The company can boast of a top-class research and development centre with powerful workstations, a modern laboratory and high-quality equipment. Members of the development team primarily contribute to innovations in current boilers and the introduction of new, more powerful modules. Ideas for new, more efficient products are born here, the design is optimised to improve quality while maintaining or reducing the price, taking into account new technologies and their implementation. In addition, existing boilers are further refined within the entire Vaillant group.
The main tasks of the research and development centre of the Protherm Production plant are the development of hydraulic modules for boilers, gas condensing and non-condensing boilers and electric boilers. We also find here the team of sustainable engineering (Sustaining Engineering) and the team of project and product management. The final form of the product is created thanks to the close cooperation of the development staff of the Protherm Production company with the developers from other companies in the group.
Recently, new departments have also been created within the research and development centre. One of them is the Intellectual Property Department, whose task is to register new patents. We have also expanded the group of simulation engineers, who are experts in CAE simulations.
The research and development centre currently has 63 employees. It also includes an expanded prototype workshop and a modern testing centre. What our developers design is assembled in the prototype workshop, tested in the laboratory and finally introduced into mass production.
