Hydroland WHITE LINE connector for 1" – 1" hoses

Product detailed description

This coupling from the WHITE LINE range is designed for hoses with a diameter of 1". It is suitable when the hose is cut, cracked or otherwise damaged: instead of replacing the entire piece, it is sufficient to remove the faulty section and reconnect the remaining parts.

The procedure is simple. Cut the hose until you reach the healthy material, and then push both clean ends onto the coupling, each from one side. You can also use it to connect two separate 1" hose pieces if one piece does not reach the desired distance.

Main Features

• WHITE LINE range from the brand Hydroland
• Function as a hose repair coupling
• Dimensions 1" to 1"
• Used to repair a damaged section and also to extend the hose by connecting two pieces

Technical Data

Application and Installation

When repairing a hose, ensure the cut is straight and the ends are clean, free of dirt, otherwise the coupling may not seat properly. Push the ends onto the coupling gradually until they are fully seated. After restoring the water supply, check the coupling to ensure there is no water leakage anywhere.

Frequently Asked Questions

Can this coupling repair a cracked hose?

Yes. The damaged section is cut off to the healthy hose on both sides, and both ends are pushed onto the coupling.

What hose dimensions is the coupling suitable for?

It is suitable for hoses with dimensions 1" to 1".