DRY EASY BOX IVAR.INST installation box with dry siphon for wall-mounted air conditioners and fan coils
Code: I07000586Product detailed description
The DRY EASY BOX of type IVAR.INST (code I07000586) is built into the wall in the same way as an electrical back box. Copper pipes, electrical cables and the condensate pipe are brought into it before the indoor unit is mounted, so the installation of a wall-mounted air conditioner or fan coil can be fully prepared in advance. It is designed for IVAR.X-REVO wall-mounted split air conditioners and SILENCE IVAR.EGWW wall-mounted fan coils.
Why a dry siphon
- the condensate pipe connects directly to the dry siphon
- the siphon stops odours returning from the drain pipe, even when the air conditioner is not running
- no condensate tray – no water stands in the box and it cannot overflow if the drain is blocked
- prevents condensate build-up that causes damp, mould and the spread of bacteria
- compact siphon that is easy to inspect
Further benefits
- reversible design – condensate outlet on the left or right
- better insulation of the electrical cables
- eliminates thermal bridges that create damp patches on the wall
- protects the drain pipe from small debris during installation
Installation in brief
First choose the side for the condensate drain and fit the rear panel of the box accordingly. On the chosen side, push out the plastic side covers, fit the supplied O-rings on the condensate outlet and insert the copper pipes and cables. The supplied template helps to level the plaster around the opening; the front cover is only removed when the air conditioner is mounted. The 600 mm condensate pipe comes with the box and can be shortened – the hose supplied with the split unit is no longer used with the box. Installation of the air conditioning unit and the electrical connection may only be carried out by a qualified person with refrigerant handling certification.
Technical data
| Code | I07000586 |
| Manufacturer | IVAR |
| Type | IVAR.INST |
| Designation | DRY EASY BOX |
| Application | IVAR.X-REVO wall-mounted split units, SILENCE IVAR.EGWW fan coils |
| Mounting | in the wall (flush plastic box) |
| Siphon | dry, inspectable |
| Condensate connection | direct, without tray |
| Outlet side | left or right |
| Condensate pipe | 600 mm, can be shortened |
Frequently asked questions
Which units is the box used with?
It is used to prepare the installation of IVAR.X-REVO wall-mounted split air conditioners and SILENCE IVAR.EGWW wall-mounted fan coils. It is set into the wall in advance, much like an electrical back box.
What is the dry siphon in the box for?
The dry siphon prevents odours from the condensate drain pipe from coming back into the room, even when the air conditioner is not in operation.
Can the condensate outlet be on either the left or the right?
Yes, the box is reversible. The side is chosen when fitting the rear panel, which is set into the wall according to the direction of the condensate drain.
Can I use the condensate hose supplied with the air conditioner?
No, when the box is used the split unit's own drain pipe is no longer needed. The box has its own 600 mm pipe, which can be cut to the required length.
Additional parameters
| Category: | air conditioning |
|---|---|
| Warranty: | 2 years |
| Code: | I07000586 |
| Manufacturer: | IVAR |
| Type: | IVAR.INST |
| Designation: | DRY EASY BOX |
| Application: | IVAR.X-REVO wall-mounted split units, SILENCE IVAR.EGWW fan coils |
| Mounting: | in the wall (flush plastic box) |
| Siphon: | dry, inspectable |
| Condensate connection: | direct, without tray |
| Outlet side: | left or right |
| Condensate pipe: | 600 mm, can be shortened |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.