K 12/200 M Centrifugal pump with a single impeller
Code: 60168883Related products
Product detailed description
Centrifugal pumps s one impeller kolesom
- Simple single-stage horizontal centrifugal pump s cast-iron telesom
- Radial or mixed-flow impeller je according to typu z technopolymer A or B, or z liatiny
- Mechanical seal: carbon / keramika
- Closed asynchronous motor cooled by external ventilation
- Built-in thermal ochrana motora a capacitor pri single-phase version
- For three-phase motors, suitable motor overload protection must be used
- Protection rating: IP44
- Insulation class: F
- Made according to standard : CEI 2-3
- Operating range from 1,8 do 96 m3/h s head of up to 62 m
- Liquid temperature range: od -10 °C do + 50 °C (K 20/41 – K 30/70 - K 30/100 – K 36/100 – K 12/200 – K 36/200 – K 40/200)
od -15 °C do + 110 °C (other modely ) - Pumped liquid: clean, without solids a abrasive substances, non-aggressive, non-viscous, non-crystallising, chemically neutral, with properties close to water
Centrifugal pumps s dvomi opposed impeller kolesami
- Two-stage horizontal pump s cast-iron telesom s dvomi volutes separated medzidoskou
- Radial impeller impellers are z technopolymer A or z technopolymer B
- Mechanical seal: carbon / keramika
- Closed asynchronous motor cooled external ventilation
- Built-in thermal ochrana motoru a capacitor pri single-phase verzii
- Pre three-phase motory je necessary use suitable ochrany motoru proti overload
- Protection rating motora: IP44
- Insulation class: F
- Made according to normy CEI 2-3
- Liquid temperature range:
od -10 °C do +50 °C (K 35/40 - K 45/50 - K 35/100 - K 40/100 - K 55/100)
od -15 °C do +110 °C (other modely) - Pumped liquid: clean, without solids or abrasive substances, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close vode
- Operating rozsah: flow od 1,2 do 30 m3/h s head do 97 m.
Frequently Asked Questions
- How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer who will size the pump precisely for you.
- Must the installation be carried out by a professional? Fitting the pump into prepared pipework can be handled even by a skilled DIYer, but we recommend having the electrical connection and system balancing checked by a professional.
Additional parameters
| Category: | DAB.K - single-impeller pumps |
|---|---|
| Insulation Class: | F |
| IP Rating: | IP44 |
| Manufactured to standard: | CEI 2-3 |
| Mechanical shaft seal: | carbon / ceramic |
| Motor Protection Rating: | IP44 |
| Operating range: | flow from 1.2 to 30 m³/h with a head of up to 97 m |
| Last price update: | 09.03.2026 0:11:24 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Jörg
ATRIASHOP.DE
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.