PNI MAB300 Kit for Wing Gate, 200 kg, with Smart Relay RG120
Code: PNI-MAB300-RGProduct detailed description
The PNI MAB300 set with the intelligent relay PNI SmartHome RG120 is used for the automation of double-wing gates and, in addition to the remote control, also allows the use of the Tuya app. The core of the system consists of two piston motors with a power of 40 W, a control unit, two remote controls, two photoelectric sensors, a warning light, a stop bumper, and a set of mounting accessories. The motors drive wings with a weight of up to 200 kg and a maximum length of 2.5 meters.
Main Features
- two piston motors 40 W with 24 V power supply and maximum stroke of 300 mm
- opening angle 90° to 110°
- carrying capacity 200 kg and wing length up to 2.5 m, for each of the two wings
- remote controls with a range of up to 50 m at a frequency of 433 MHz
- possibility to connect electromagnetic locks, holding electromagnets, access buttons, and access keypads
- optional power supply from a solar system or from a 24V backup battery
- IP55 protection against weather influences
- intelligent relay PNI SmartHome RG120 for the Tuya app
Control via the intelligent relay
The PNI SmartHome RG120 relay extends the classic remote control by allowing you to control the gate via the Tuya mobile app. The principle is simple: the relay receives a command from a smartphone and forwards it to the control unit as a signal to open or close. You can thus operate the gate not only with a remote control, but also from your phone.
Operating modes and obstacle protection
After the set time has elapsed, the gates can close automatically. The wings can be opened and closed simultaneously, with a maximum time difference of 10 seconds between them, or it is possible to open only one of the two wings. If the unit detects an obstacle during movement, the gates will stop.
Technical specifications
Motors
| Power supply | 24 V |
| Power | 2 x 40 W |
| Maximum load capacity | 200 kg |
| Maximum wing length | 2.5 m x 2 |
| Arm extension speed | 1.6 cm/s |
| Protection rating | IP55 |
| Maximum working stroke | 300 mm |
| Opening angle | 90° – 110° |
Remote control
| Battery | alkaline, 23A, 12 V |
| Dimensions | 38 x 14 x 58 mm |
| Communication distance | up to 50 m |
| Frequency | 433 MHz |
Warning light
| Power supply | 12–265 V |
| Power | 1.5 W |
| Dimensions | 90 x 80 x 140 mm |
Photoelectric sensors
| Power supply | 12 / 24 V |
| Communication distance | up to 10 m |
| Dimensions | 75 x 30 x 50 mm |
Package contents
- user manual
- 2 motors
- control panel
- warning light
- 2 photoelectric sensors
- 2 remote controls
- mounting accessories, stop bumper
- intelligent relay PNI SmartHome RG120
The total weight of the set is 13.87 kg.
Usage and installation
The set is suitable for double-wing gates whose wings do not exceed 200 kg and 2.5 m. Before installation, check that the wings move smoothly and that the hinges are in good condition, as the motor is only intended to drive the gate, not to overcome mechanical faults. Install the photoelectric sensors opposite each other at such a height and position that they cover the entire passage. It is advisable to leave the electrical wiring and unit setup to an experienced installer.
Frequently asked questions
How does this set differ from the basic PNI MAB300?
It is supplemented with the intelligent relay PNI SmartHome RG120, which allows the use of the Tuya app.
What size of gate wings can the set handle?
Wings with a weight of up to 200 kg and a maximum length of 2.5 m.
Can the gate be opened with just one wing?
Yes, the system allows you to open only one of the two wings.
Additional parameters
| Category: | Gate Operators and Access Control |
|---|---|
| Weight: | 13.87 kg |
| EAN: | 5949066541193 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!