IVAR.H2Q CON condensate box – automatic condensate pump for air conditioners and boilers, 230 V – SALE
Code: CON.B306622Product detailed description
The IVAR.H2Q CON (code CON.B306622) is a compact unit that collects condensate from air conditioners, dehumidifiers, furnaces, condensing boilers and similar appliances in a small reservoir and drains it away automatically with a pump. It suits under-ceiling, floor-standing and cassette air-conditioning units.
How it works
Condensate enters the box through one of the two top openings with an inner diameter of 25 mm. A float switch starts the pump according to the level, and the pump pushes the condensate through the built-in non-return valve into the drain hose with an inner diameter of 10 mm. A second safety switch signals overflow – it is wired to an audible alarm or to the air conditioner switch that shuts the unit down, and only to Class 2 low voltage.
Technical data
- power supply 220–230 V, 50/60 Hz, power input 58/55 W
- max. head 5.2 m at 50 Hz, 6.2 m at 60 Hz
- pumped liquid: clean water and condensate from 0 to +60 °C
- shaded-pole motor, insulation class B, built-in thermal protection, stainless-steel shaft, ball bearings
- impeller of glass-fibre-reinforced polyamide, ABS housing
- dimensions 280 × 125 × 140 mm, 2 m power cable
Installation
Cut the end of the inlet pipe at 45° and leave it at least 10 mm above the bottom of the reservoir so that it does not clog; secure the drain hose with a clamp. Before connecting the box, let the air conditioner’s condensate drain several times into a separate container to flush residual oil out of the system. The box is not a submersible pump and is not intended for swimming pools or coastal areas. It must be earthed and supplied from a circuit with a protective conductor and a residual current device; installation and electrical connection must be done by a qualified person.
Technical data
| Code | CON.B306622 |
| Manufacturer | IVAR |
| Type | IVAR.H2Q CON |
| Power supply | 220–230 V, 50/60 Hz |
| Power input | 58/55 W (50/60 Hz) |
| Max. head | 5.2 m (50 Hz) / 6.2 m (60 Hz) |
| Inlet | 2 openings, inner diameter 25 mm |
| Outlet | inner diameter 10 mm |
| Non-return valve | built-in |
| Liquid temperature | 0 to +60 °C |
| Dimensions | 280 × 125 × 140 mm |
| Motor protection | built-in thermal protection |
| Cable | 2 m |
Frequently asked questions
Can the H2Q CON be submerged in water?
No. It is a box with a built-in pump, not a submersible pump, and it is not intended for swimming pools or coastal areas either. Condensate is fed into it by a hose through the top opening.
What is the safety switch for?
It signals overflow when the level in the reservoir is too high. It is wired to an audible alarm or to the air conditioner switch that shuts the unit down – only to Class 2 low voltage.
What should be done before connecting the box to the air conditioner?
Let the air conditioner’s condensate drain several times into a separate container to flush out residual oil. Then connect the inlet to the 25 mm top opening and secure the 10 mm outlet with a clamp.
How warm can the condensate be?
The box pumps clean water or condensate from 0 to +60 °C. The maximum head is 5.2 m at 50 Hz.
Additional parameters
| Category: | other pumps and accessories |
|---|---|
| Warranty: | 2 years |
| Pump type: | submersible dirty water / drainage |
| Code: | CON.B306622 |
| Manufacturer: | IVAR |
| Type: | IVAR.H2Q CON |
| Power supply: | 220–230 V, 50/60 Hz |
| Power input: | 58/55 W (50/60 Hz) |
| Max. head: | 5.2 m (50 Hz) / 6.2 m (60 Hz) |
| Inlet: | 2 openings, inner diameter 25 mm |
| Outlet: | inner diameter 10 mm |
| Non-return valve: | built-in |
| Liquid temperature: | 0 to +60 °C |
| Dimensions: | 280 × 125 × 140 mm |
| Motor protection: | built-in thermal protection |
| Cable: | 2 m |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.