Unmixed boiler module IVAR.S-300 DN 50 with circulation pump DAB.EVOPLUS B 120/280.50 M

Product detailed description

The IVAR.S-300 DN 50 boiler module (code IVA49043620DAB) forms the unmixed branch of the boiler room: it delivers heating water from the heat source straight into the circuit without changing its temperature. It suits radiator heating, charging of domestic hot water cylinders and charging and discharging of buffer tanks in closed hot-water heating and cooling systems.

Module equipment

• flow and return pipes with DN 50 flanges for connection to the horizontal distribution manifold
• electronic circulation pump DAB.EVOPLUS B 120/280.50 M
• four wafer-type butterfly valves on the primary and secondary side
• check valve, two fill/drain valves and pressure ports
• two 0–120 °C thermometers on the secondary side and sensor pockets Ø 6 mm
• Trocellen C080 thermal insulation, 30 mm thick (λ 0.034 W/m·K)

Output and dimensions

At ΔT 20 K the module transfers up to 274 kW, at ΔT 5 K up to 68 kW; the maximum flow rate is 11800 l/h. Operating pressure is limited to 10 bar and temperature to +100 °C. The body is made of Fe EN 10217-1 steel with epoxy powder coating, the connection centre distance is 300 mm and the dimensions are 940 × 660 × 477 mm.

Installation

The module bolts directly onto the IVAR.HC-DN 50 manifold or via IVAR.CONNECTA reduction sets; bolts, nuts, washers and gaskets are included. From the factory the primary connection is on the right – by swapping the flow and return pipes and cutting the insulation as described in the manual, it can be moved to the left. Do not use mineral-oil lubricants on the EPDM seals. Installation and electrical connection of the pump may only be carried out by a qualified person with electrical qualifications. The whole system must be flushed before first start-up.

Technical data

Frequently asked questions

What is the unmixed module IVAR.S-300 DN 50 used for?
For direct distribution of heating water without mixing – radiator circuits, charging of domestic hot water cylinders and charging or discharging of buffer tanks. It is intended for closed hot-water heating and cooling systems.

Is the circulation pump part of the module?
Yes, module IVA49043620DAB comes fitted with the electronic pump DAB.EVOPLUS B 120/280.50 M. The same module without a pump has the code IVA49043620.

Which manifold does the module mount on?
Directly on the IVAR.HC-DN 50 horizontal distribution manifold or via IVAR.CONNECTA reduction sets. Bolts, nuts, washers and gaskets for the joint are included.

Can the primary connection be moved to the left?
Yes. The module is delivered with the connection on the right; according to the manual, the flow and return pipes are swapped and the thermal insulation is cut for the left-hand version.