Li-Ion 12 V / 4.0 Ah Battery for Press IVAR.ACO 103 BT
Code: 18367-50Product detailed description
The accumulator with code 18367-50 powers the accumulator electric hydraulic press IVAR.ACO 103 BT. It is a lithium-ion battery with a voltage of 12 V and a capacity of 4.0 Ah, which is inserted into the press until it clicks into place.
- Li-Ion technology, 12 V
- capacity 4.0 Ah
- for IVAR.ACO 103 BT presses including SET B and SET M kits
It has double the capacity compared to the 2.0 Ah accumulator that the press is delivered with, and therefore lasts longer between charges. The 2.0 Ah version has code 18366-50.
The ACO 103 BT press can only operate with 12 V lithium-ion accumulators. Before starting the pressing process, it automatically checks whether there is enough energy to complete the entire cycle, and the battery charge status is indicated by three green LEDs on the press. The accumulators are delivered from the factory uncharged and are charged using the 230 V charger for IVAR.ACO 103 BT (code 17662-50) while following the temperature conditions specified in its manual.
Technical specifications
| Code | 18367-50 |
| Brand | IVAR |
| Type | IVAR.PRISLUSENSTVI |
| Type | Li-Ion accumulator |
| Voltage | 12 V |
| Capacity | 4.0 Ah |
| Intended for | IVAR.ACO 103 BT |
| Charger | 230 V, code 17662-50 (separate) |
Frequently asked questions
Which press does the accumulator fit?
It fits the accumulator electric hydraulic press IVAR.ACO 103 BT including SET B and SET M kits. The press operates only with 12 V lithium-ion accumulators.
Is the accumulator charged right after unpacking?
No, accumulators are delivered from the factory uncharged. Before the first use, charge them using the 230 V charger for IVAR.ACO 103 BT (code 17662-50), which is not part of this item.
What is the difference compared to the 2.0 Ah accumulator?
The voltage and usage are the same, but the 4.0 Ah accumulator has double the capacity and lasts longer between charges. The 2.0 Ah version has code 18366-50.
Additional parameters
| Category: | electro-hydraulic press tools |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 18367-50 |
| Brand: | IVAR |
| Type: | IVAR.PRISLUSENSTVI |
| Product: | Li-Ion battery |
| Voltage: | 12 V |
| Capacity: | 4.0 Ah |
| For: | IVAR.ACO 103 BT |
| Charger: | 230 V, code 17662-50 (separate) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.