Manifold/collector assembly - for underfloor heating - N-KLASIK cabinet 3 - 1"xEK; 7-way; brass
Code: 553975NRelated products
Product detailed description
- PN 10, T = +90 °C
- the assembly includes: a manifold with control flow meters, a collector with shut-off valves, mounting brackets, 2 pcs ball valves with union, 2 pcs pass-through spacers with an automatic air vent, a rotary drain valve and a thermometer, 2 pcs plugs, and an installation cabinet of the appropriate size
- material: CW617N brass
Attention: - can be ordered without a cabinet - the price will be reduced by 51,00 €
- when ordering, state the cabinet type after the order code: code only (flush-mounted), code + N (surface-mounted), or code + BS (without cabinet)
Warning: - Before every start-up of the heating system, especially when combining underfloor and radiator heating, we strongly recommend flushing the whole system according to the manufacturer's instructions. We recommend treating the heating system with GEL.LONG LIFE 100. The seller is not liable for functional defects caused by contamination in the system.
Frequently Asked Questions
- How do I choose the right manifold/accessory? Go by the number of circuits needed and the connection size - it must match the diameter of the main supply pipe from the heat source.
- Must the installation be done by a professional? A skilled DIYer can fit the manifold and its accessories, but we recommend having a heating technician connect it to the working heating system and balance it.
Additional parameters
| Category: | IVAR CS 553 VP without pump |
|---|---|
| Material type: | CW617N brass |
| Operating temperature: | +90 °C |
| Nominal pressure: | PN 10 |
| Last price update: | 13.04.2026 1:04:23 |
-
59132-file-sktl-ivarcs-553-vp-czver-16.pdf (573.5 kB)
-
66970-file-skost-prohlaseni-rozdelovace-sberace-a-komponenty-16.pdf (437.9 kB)
-
82702-file-sknavod-ivarcs-553-vp-dvp-sk-16.pdf (816.6 kB)
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
G
Gerald
Gerald
I am planning to install underfloor heating in a room with seven separate circuits and I would like to confirm whether this 7-way brass manifold assembly, housed in the N-KLASIK 3 cabinet with a 1"xEK connection, is suitable for use without an integrated pump, and whether the cabinet dimensions allow for standard in-wall recessed installation.
A
ATRIA.SK
ATRIA.SK
Yes, this is a 7-way manifold set in the N-KLASIK 3 cabinet, made from brass, with a 1"xEK connection, and it comes without a pump — so you would need to add a pump separately if your system requires one. The N-KLASIK 3 cabinet is designed for recessed wall mounting, which is the standard approach for a neat installation. If you need a version with a pump already included, we do carry pump-equipped variants of this manifold assembly as well.