PAW reducing sets and accessories
IVAR.LO-RG reducing sets connect a boiler module to a larger manifold, for example DN 65 or DN 50 to a DN 32 or DN 40 module. The axial LO-RC 150-100 set joins two distribution manifolds of DN 150 and DN 100. Each pack contains 2 pieces, one for flow and one for return.
Product sorting
List of products
Brass reduction set that lets a PAW.HEAT BLOC DN 20 boiler module be mounted on a...
Listing controls
Reducing sets allow you to connect PAW boiler modules and manifolds of different dimensions (DN 25, DN 32, DN 40, DN 50) within a single assembly, for example when combining a larger-dimension manifold with smaller-dimension modules. The category also includes actuators for PAW mixing valves (24 V and 230 V, with a torque of 5 Nm or 10 Nm) and a set for reversed installation of the DN 32 module.
The choice of reducing set is determined by the combination of the inlet and outlet dimension (e.g. DN 50 - DN 40 or DN 25/DN 32), while the actuator is chosen according to the control voltage and the required valve torque.
Frequently Asked Questions
- What is a reducing set used for? To connect PAW system components of different dimensions within a single assembly, for example a manifold and a module with a different bore.
- How do I choose an actuator? According to the control voltage (24 V or 230 V) and the required torque of the mixing valve (5 Nm or 10 Nm).
- What is the reversed installation set for? It allows the module to be mounted in a mirror-reversed position, for example when boiler room space is limited.
- Are the reducing sets compatible with all PAW modules? Yes, within the PAW system for the stated dimensions DN 25 to DN 50.