PNI SVM-10K single-phase voltage stabilizer with servo motor, 10 kVA / 8000 W, output 230 V
Code: PNI-SVM-10K-SProduct detailed description
PNI SVM-10K is a single-phase voltage stabilizer with a servo motor and a power of 10 kVA (8000 W). It is suitable wherever a stable 230 V is required for a large number of devices – family home, workshop, agricultural or small industrial operation. If the voltage in the power grid changes, the stabilizer automatically adjusts it to be as close as possible to the set value.
The regulation is smooth: the circuit measures the input voltage and sends a signal to the servo motor, which sets the position of the carbon brush. The output is therefore always the same and the sinusoidal waveform is not distorted. The efficiency is at least 96 %.
There are two displays on the front panel showing the input and output voltage. The protections include an automatic circuit breaker in case of overload, short circuit and overheating, mechanical fault reporting, start delay and output overvoltage protection at 250 V or undervoltage protection at 183 V.
Installation and operation
The stabilizer is connected via a terminal block on the back, so it should be connected by a person with electrical qualifications. The dimensions are 410 × 240 × 370 mm and the weight with packaging is approximately 29 kg, so you should plan for assistance when handling it. It is used at temperatures from −10 to +45 °C and humidity up to 95 % without condensation.
Frequently asked questions
What power can it handle?
The rated power is 10 kVA, which at a power factor of 0.8 corresponds to 8000 W.
Is a power cable included in the package?
No, the package includes the stabilizer and the manual; the connection is made via the terminal block.
Can it be connected to a three-phase grid?
No, it is a single-phase model. A separate three-phase stabilizer is available for three-phase grids.
Technical specifications
| Brand | PNI |
| Manufacturer code | PNI-SVM-10K-S |
| EAN | 5949066523953 |
| Type | Single-phase voltage stabilizer with a servo motor |
| Power | 10 kVA / 8000 W |
| Power factor | 0.8 |
| Input voltage | 160–260 V AC, 50/60 Hz |
| Output voltage | 230 V |
| Connection | terminal block L / N / PE / N / L / N / L |
| Efficiency | ≥ 96 % |
| Indication | 2 displays: input and output voltage |
| Protections | overload, short circuit, overheating, overvoltage (output 250 V), undervoltage (output 183 V), mechanical fault, start delay |
| Operating temperature | −10 to +45 °C |
| Humidity | max. 95 % without condensation |
| Dimensions | 410 × 240 × 370 mm |
| Package contents | stabilizer, manual |
| Weight | 25.45 kg |
| Warranty | 24 months |
| Country of origin | China |
Additional parameters
| Category: | Backup Power Supplies - Boilers, Pumps |
|---|---|
| Warranty: | 2 years |
| Weight: | 28.92 kg |
| EAN: | 5949066523953 |
| Brand: | PNI |
| Manufacturer code: | PNI-SVM-10K-S |
| EAN: | 5949066523953 |
| Type: | Single-phase servo-motor voltage stabiliser |
| Power: | 10 kVA / 8000 W |
| Power factor: | 0.8 |
| Input voltage: | 160–260 V AC, 50/60 Hz |
| Output voltage: | 230 V |
| Connection: | terminal block L / N / PE / N / L / N / L |
| Efficiency: | ≥ 96 % |
| Indication: | 2 displays: input and output voltage |
| Protections: | overload, short circuit, overheating, overvoltage (output 250 V), undervoltage (output 183 V), mechanical error, start-up delay |
| Operating temperature: | −10 to +45 °C |
| Humidity: | max. 95 %, non-condensing |
| Dimensions: | 410 × 240 × 370 mm |
| Package contents: | stabiliser, manual |
| Weight: | 25.45 kg |
| Warranty: | 24 months |
| Country of origin: | China |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!