3" submersible pump DAB MICRA 50 M with 15 m cable and starter box, 1×230 V
Code: I0090116Product detailed description
The MICRA 50 M is a multistage 3" submersible centrifugal pump with a built-in check valve, intended mainly for clean water from narrow boreholes. It is used for pressure boosting and water distribution in homes and businesses, for filling tanks and for irrigation.
This code in detail
- Product code: I0090116.
- Model: MICRA 50 M, 1×230 V supply.
- Input power P1 max. 0.65 kW, rated power P2 0.37 kW, rated current 3.3 A.
- Motor capacitor: 12 µF / 450 V.
- Maximum head 45 m at 0.3 m³/h; at 2.7 m³/h 6 m.
- Pump height 930 mm, weight 9 kg.
- The set contains a 15 m cable and a starter box (control box).
Construction
- Noryl impellers, self-lubricating polyacetal diffusers, brass suction and discharge housings.
- Stainless-steel suction strainer, shaft with coupling, cable guard and pump casing; G 1" F discharge port with lifting eyes.
- Two-pole submersible motor with the stator in a watertight stainless-steel (AISI 304) shell; the bearings are cooled and lubricated by the water fill, so the water source cannot be contaminated.
- Protection class IP68, insulation class F.
Operating conditions
Clean water without solid or abrasive particles, from 0 to +35 °C, sand content up to 40 g/m³, up to 20 starts per hour. Vertical installation, fixed or portable; the largest outline of the pump is 74 mm. The electrical connection should be made by a qualified specialist.
Technical data
| Code | I0090116 |
| Manufacturer | DAB |
| Type | DAB.MICRA |
| Model | MICRA 50 M |
| Supply | 1×230 V |
| Input power P1 max. | 0.65 kW |
| Power P2 | 0.37 kW |
| Rated current | 3.3 A |
| Maximum head | 45 m |
| Discharge port | G 1" F |
| Supply cable | 15 m |
| Starter box | included in the set |
| Pump height | 930 mm |
| Weight | 9 kg |
| Ingress protection | IP68 |
Frequently asked questions
Does the pump need a starter box?
Yes, the single-phase version (M) needs it for starting and overcurrent protection. In this set the box (control box) is included together with the 15 m cable.
Which boreholes is the MICRA suited to?
It is a 3" pump with a largest outline of 74 mm, intended mainly for narrow boreholes and wells with clean water up to +35 °C.
What head does the MICRA 50 M reach?
Up to 45 m at the lowest flow of 0.3 m³/h; at 2.7 m³/h it is 6 m (data from the technical sheet).
Additional parameters
| Category: | DAB.MICRA - submersible 3" well pumps |
|---|---|
| Warranty: | 2 years |
| Weight: | 9 kg |
| Code: | I0090116 |
| Manufacturer: | DAB |
| Type: | DAB.MICRA |
| Model: | MICRA 50 M |
| Supply: | 1×230 V |
| Input power P1 max.: | 0.65 kW |
| Power P2: | 0.37 kW |
| Rated current: | 3.3 A |
| Maximum head: | 45 m |
| Discharge port: | G 1" F |
| Supply cable: | 15 m |
| Starter box: | included in the set |
| Pump height: | 930 mm |
| Weight: | 9 kg |
| Ingress protection: | IP68 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
