IVAR WPS 4-16 P KIT 3" submersible borehole pump – 0.75 kW, 1 × 230 V, with starter box (IVAR.WPS 4-16 P KIT) – SALE
Code: 3040161CEProduct detailed description
The IVAR WPS 4-16 P KIT (code 3040161CE) is a single-phase 3" submersible pump with a 74 mm diameter for drilled wells. It is suitable for supplying water to households, cottages and family homes, for garden irrigation and for use in tanks, in continuous or intermittent duty. The set includes the pump with a starting control unit (starter box) and a 30 m flat submersible cable.
Performance of the 4-16 model
The motor with an output P2 of 0.75 kW (1 HP) draws 5.6 A at full load. The pump reaches a head of 66 m at zero flow, 45 m at the nominal flow of 4 m³/h and 29 m at 5 m³/h. The total length of the electric pump is 1165 mm and it weighs 10.3 kg.
Construction
- stainless-steel pump body, suction and discharge connections in cast copper
- wear-resistant floating polyacetal impellers and polycarbonate diffusers
- AISI 304 stainless-steel shaft and coupling, motor adapter to the NEMA standard
- rewindable oil-filled IVAR.WPS submersible motor with all wetted parts in stainless steel
- built-in non-return valve and G 1" discharge
Installation conditions
The water may be at no more than 35 °C, with a pH of 6.5 to 8.5, solid particles of 2 mm at most and a sand content of up to 300 g/m³. The pump must be fully submerged, to a maximum depth of 80 m, and is installed vertically – with a maximum tilt of 30°; horizontal installation is prohibited. The 3G1 mm² supply cable is 30 m long. The pump must be earthed and protected by a residual current device; connection must be carried out by a qualified person.
Technical data
| Code | 3040161CE |
| Manufacturer | IVAR |
| Type | IVAR.WPS 4-16 P KIT |
| Version | pump with starter box and 30 m cable |
| Pump diameter | 74 mm (3") |
| Output P2 | 0.75 kW (1 HP) |
| Power supply | 1 × 230 V, 50 Hz |
| Full-load current | 5.6 A |
| Max. head | 66 m |
| Nominal flow | 4 m³/h |
| Discharge | G 1" |
| Total length | 1165 mm |
| Weight | 10.3 kg |
| Max. submersion depth | 80 m |
| Max. water temperature | 35 °C |
Frequently asked questions
What does the designation WPS 4-16 P mean?
The first number gives the nominal flow in m³/h (4 m³/h) and the letter P the material code (polycarbonate). The pump is a 3" size with a 74 mm diameter.
Can the pump run horizontally?
No. The pump is installed vertically with a maximum tilt of 30°; horizontal installation is prohibited. During operation it must be fully submerged.
What is included in the delivery?
The pump with built-in non-return valve, the starting control unit (starter box) and a 30 m blue flat submersible cable, 3G1 mm².
Additional parameters
| Category: | DAB.S4 OL - submersible 4" pumps with oil-filled motor |
|---|---|
| Warranty: | 2 years |
| Weight: | 10.3 kg |
| Voltage: | 230 V |
| Pump diameter (borehole): | 3" or less |
| Maximum flow rate: | 51 – 100 l/min |
| Type: | pump |
| Code: | 3040161CE |
| Manufacturer: | IVAR |
| Type: | IVAR.WPS 4-16 P KIT |
| Version: | pump with starter box and 30 m cable |
| Pump diameter: | 74 mm (3") |
| Output P2: | 0.75 kW (1 HP) |
| Power supply: | 1 × 230 V, 50 Hz |
| Full-load current: | 5.6 A |
| Max. head: | 66 m |
| Nominal flow: | 4 m³/h |
| Discharge: | G 1" |
| Total length: | 1165 mm |
| Weight: | 10.3 kg |
| Max. submersion depth: | 80 m |
| Max. water temperature: | 35 °C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.