DAB SS6B 09 6" submersible borehole and well pump – pump end for 5.5 kW motor (DAB.SS6B)

Product detailed description

The DAB SS6B 09 (code 60167927) is the hydraulic part (pump end) of a 6" multistage submersible centrifugal pump from the DAB SS6 range. It is made entirely of stainless steel and intended for wells and boreholes of sufficient diameter. It is supplied separately, without a motor: according to its designation it goes with a 5.5 kW submersible motor.

Applications

• water supply for homes and larger buildings
• sprinkler and hydrant fire-fighting systems
• irrigation systems
• groundwater pumping in domestic and industrial settings

Construction

Impellers, diffusers, cable guard, suction casing and discharge casing are made of AISI 304 stainless steel. The impellers are dynamically balanced and the pump has a built-in check valve. The discharge of the SS6B 09 model is 2 1/2". The SS6 range covers flow rates up to 75 m³/h and heads up to 670 m; the water may contain no more than 50 g/m³ of sand or silt.

Motor and installation

The pump end is coupled with 4" submersible motors (DAB 4GG, 4OL) or 6" motors (DAB 6GF) – the right combination for the specific model must be checked in the manufacturer’s documentation. The pump power must not exceed the motor power. The pump is installed vertically; horizontally only with a cooling sleeve and if the motor allows it. Connection and commissioning must be carried out by a qualified person.

Technical data

Frequently asked questions

Is the motor included?
No, the SS6B 09 is only the pump end. The 5.5 kW motor is ordered separately – depending on the hydraulics this is a 4" DAB 4GG or 4OL motor or a 6" DAB 6GF motor; check the combination in the manufacturer’s documentation.

Can the pump operate horizontally?
Yes, but only with a cooling sleeve and with a motor that permits horizontal installation. As standard, the pump is mounted vertically.

How dirty can the water be?
The SS6 range is designed for water with no more than 50 g/m³ of sand or silt. For aggressive water, the manufacturer offers an AISI 316 stainless-steel version on request, which is not covered by this code.