Submersible motor DAB.MOTOR 4GX TESLA 4" – 0.55 kW, 1x230 V
Code: 60141580Product detailed description
The DAB.MOTOR 4GX TESLA 4" submersible motor is a two-pole asynchronous motor by DAB rated at 0.55 kW for single-phase supply 1x230 V. It is intended to drive submersible pumps with a NEMA 4" flange.
Construction
- The mechanical parts are made of AISI 316 stainless steel.
- The rotor runs in radial sleeve bearings, and the axial load is carried by a robust sliding thrust bearing.
- The radial bearings and the thrust bearing pan are lubricated and cooled by a liquid filling.
- The stator is hermetically sealed in a stainless sleeve filled with an inert gas mixture based on argon.
- The winding leads (with the protective conductor) pass through a sealed connector and a flat four-core lead above the pump, where your own supply cable is connected.
- NEMA 4" flange, IP68 protection, insulation class F.
Starting and protection
- Starting and protection of a single-phase motor are usually handled by a CONTROL BOX starter box with a starting capacitor and a manually resettable overload protection. The CONTROL HS system is intended for heavier starting.
Wiring and commissioning of the motor should be carried out by a qualified electrician.
Technical data
| Code | 60141580 |
| Manufacturer | DAB |
| Type | DAB.MOTOR 4GX |
| Power | 0.55 kW |
| Supply | 1x230 V / 50 Hz |
| Flange | NEMA 4" |
| Protection | IP68 |
| Insulation class | F |
| Material | AISI 316 |
| Filling | liquid filling |
Frequently asked questions
Which pumps is the motor intended for and what flange does it have?
It is a submersible motor with a NEMA 4" flange for driving submersible pumps. It has IP68 protection and insulation class F.
How are starting and motor protection handled?
For a single-phase motor, starting and protection are usually handled by a CONTROL BOX with a starting capacitor and a manually resettable overload protection. The CONTROL HS system is used for heavier starting.
What is the motor made of and what is it filled with?
The mechanical parts are made of AISI 316 stainless steel, and the bearings are lubricated and cooled by a liquid filling. The stator sits in a stainless sleeve with an argon mixture.
Additional parameters
| Category: | DAB.MOTOR 4GX - submersible 4" motors |
|---|---|
| Warranty: | 2 years |
| Code: | 60141580 |
| Manufacturer: | DAB |
| Type: | DAB.MOTOR 4GX |
| Power: | 0.55 kW |
| Supply: | 1x230 V / 50 Hz |
| Flange: | NEMA 4" |
| Protection: | IP68 |
| Insulation class: | F |
| Material: | AISI 316 |
| Filling: | liquid filling |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
