Submersible motor DAB.MOTOR 4OL TESLA 4" – 4.0 kW, 1x230 V

Code: 60185382
Not rated Rating details
1 405,45 € –20 %
Ponorný motor DAB.MOTOR 4OL TESLA 4" – 4,0 kW, 1x230 V
1 405,45 € –20 % 1 124,36 € / pcs 914,11 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The DAB.MOTOR 4OL TESLA 4" submersible motor is a two-pole asynchronous motor by DAB rated at 4.0 kW for single-phase supply 1x230 V. It is intended to drive submersible pumps with a NEMA 4" flange.

Construction

  • The mechanical parts are made of AISI 304 stainless steel.
  • The rotor runs in radial sleeve bearings, and the axial load is carried by a robust sliding thrust bearing.
  • The radial bearings and the thrust bearing pan are lubricated and cooled by an FDA oil filling.
  • The stator is hermetically sealed in an AISI 304L stainless sleeve, and the motor is rewindable.
  • The winding leads (with the protective conductor) pass through a sealed connector and a flat four-core lead above the pump, where your own supply cable is connected.
  • NEMA 4" flange, IP68 protection, insulation class F.
  • Maximum immersion 250 m; vertical or horizontal installation (horizontal operation for ratings of 0.5 – 10 HP).

Starting and protection

  • Starting and protection of a single-phase motor are usually handled by a CONTROL BOX starter box with a starting capacitor and a manually resettable overload protection.

Wiring and commissioning of the motor should be carried out by a qualified electrician.

Technical data

Code60185382
ManufacturerDAB
TypeDAB.MOTOR 4OL
Power4.0 kW
Supply1x230 V / 50 Hz
FlangeNEMA 4"
ProtectionIP68
Insulation classF
MaterialAISI 304
FillingFDA oil
Max. immersion250 m

Frequently asked questions

Which pumps is the motor intended for and what flange does it have?
It is a submersible motor with a NEMA 4" flange for driving submersible pumps. It has IP68 protection and insulation class F.

How are starting and motor protection handled?
For a single-phase motor, starting and protection are usually handled by a CONTROL BOX with a starting capacitor and a manually resettable overload protection.

What is the motor made of and what is it filled with?
It is made of AISI 304 stainless steel with an FDA oil filling and the stator in an AISI 304L sleeve. The motor is rewindable and withstands immersion down to 250 m.

Additional parameters

Category: DAB.MOTOR 4OL - submersible 4" motors
Warranty: 2 years
Code: 60185382
Manufacturer: DAB
Type: DAB.MOTOR 4OL
Power: 4.0 kW
Supply: 1x230 V / 50 Hz
Flange: NEMA 4"
Protection: IP68
Insulation class: F
Material: AISI 304
Filling: FDA oil
Max. immersion: 250 m

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.