Submersible motor DAB.MOTOR 4OL TESLA 4" – 7.5 kW, 3x230 V
Code: 60169104Product detailed description
The DAB.MOTOR 4OL TESLA 4" submersible motor is a two-pole asynchronous motor by DAB rated at 7.5 kW for three-phase supply 3x230 V. It is intended to drive submersible pumps with a NEMA 4" flange.
Construction
- The mechanical parts are made of AISI 304 stainless steel.
- The rotor runs in radial sleeve bearings, and the axial load is carried by a robust sliding thrust bearing.
- The radial bearings and the thrust bearing pan are lubricated and cooled by an FDA oil filling.
- The stator is hermetically sealed in an AISI 304L stainless sleeve, and the motor is rewindable.
- The winding leads (with the protective conductor) pass through a sealed connector and a flat four-core lead above the pump, where your own supply cable is connected.
- NEMA 4" flange, IP68 protection, insulation class F.
- Maximum immersion 250 m; vertical or horizontal installation (horizontal operation for ratings of 0.5 – 10 HP).
Starting and protection
- Protection of the three-phase motor is provided by the user.
Wiring and commissioning of the motor should be carried out by a qualified electrician.
Technical data
| Code | 60169104 |
| Manufacturer | DAB |
| Type | DAB.MOTOR 4OL |
| Power | 7.5 kW |
| Supply | 3x230 V / 50 Hz |
| Flange | NEMA 4" |
| Protection | IP68 |
| Insulation class | F |
| Material | AISI 304 |
| Filling | FDA oil |
| Max. immersion | 250 m |
Frequently asked questions
Which pumps is the motor intended for and what flange does it have?
It is a submersible motor with a NEMA 4" flange for driving submersible pumps. It has IP68 protection and insulation class F.
How are starting and motor protection handled?
Protection of the three-phase motor is provided by the user, so it has to be planned into the electrical installation.
What is the motor made of and what is it filled with?
It is made of AISI 304 stainless steel with an FDA oil filling and the stator in an AISI 304L sleeve. The motor is rewindable and withstands immersion down to 250 m.
Additional parameters
| Category: | DAB.MOTOR 4OL - submersible 4" motors |
|---|---|
| Warranty: | 2 years |
| Code: | 60169104 |
| Manufacturer: | DAB |
| Type: | DAB.MOTOR 4OL |
| Power: | 7.5 kW |
| Supply: | 3x230 V / 50 Hz |
| Flange: | NEMA 4" |
| Protection: | IP68 |
| Insulation class: | F |
| Material: | AISI 304 |
| Filling: | FDA oil |
| Max. immersion: | 250 m |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
