PRESS elbow 90° - PPSU - 26x26
Code: 88626200Related products
Product detailed description
Koleno press 90° - PPSU, IVAR.K PPSU, size: 26 x 26, pack: 5 per bag / 50 per box
- PN 10, T = +120 °C
- for connecting ALPEX pipe of the same diameters
- material: PPSU plastic, stainless steel sleeve, EPDM seal
- compatible with B-F-TH type jaws
Frequently Asked Questions
- What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct jaw type (commonly marked B, F or TH depending on the system) matching the size and type of the fitting - without the correct tool the joint cannot be made or checked.
- How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding the joint in a wall or screed, a pressure test of the whole system should always be carried out.
- Can the joint be taken apart after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent and taking it apart requires cutting out the fitting and replacing it with a new one.
- Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.
Additional parameters
| Category: | elbows press 90° - PPSU |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.052 kg |
| EAN: | 4013960380446 |
| Material type: | PPSU plastic |
| Operating temperature: | +120 °C |
| Nominal pressure: | PN 10 |
| Last price update: | 03.05.2026 1:58:50 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
M
Martin
Martin
Hello, I'm planning to use this fitting in a press system for underfloor heating distribution. Is the 26x26 PPSU press elbow suitable for use with standard press tools, or does it require a specific jaw size?
A
ATRIA.SK
ATRIA.SK
Hi, yes, this 26x26 PPSU press elbow works with standard press jaws for 26mm press fittings, so no special tooling beyond what you'd normally use for that diameter. PPSU is a good choice for underfloor heating circuits as it handles higher temperatures well. Just make sure your press tool is compatible with the PPSU fitting profile, as some manufacturers specify their own jaw type.