Connector union with female thread IVAR.IVN462 54 mm – Rp 2", press, stainless steel AISI 304
Code: IVN462.5420Product detailed description
The IVAR.IVN462 54 mm – Rp 2" connector union is the transition piece between a pressed stainless steel pipeline and a threaded connection. The press end takes the 54 mm pipe, while the other end has an Rp 2" female thread for valves and fittings with a male thread. The two parts are held together by a union nut with a flat gasket, so the joint can be taken apart when needed. The manufacturer specifies AISI 304 stainless steel (1.4301) and, for this type, brass as well; the pressed joint is sealed by an EPDM O-ring. The overall length of the union is 95 mm and the Z dimension 37 mm.
Areas of use
The union belongs in closed heating and cooling systems and solar circuits, and is also used in lines for compressed air, vacuum, inert and technical gases, technical and process liquids, or waste water and rainwater. It is not suitable for drinking water.
Operating values
- pressure up to PN 16, vacuum down to -0.8 bar (absolute pressure 0.2 bar)
- temperature from -20 °C to +85 °C, maximum +120 °C
- antifreeze mixture up to a concentration of 50 %
Installation
The pipe is pressed with M-profile press jaws. The patented LBP (Leak Before Press) O-ring with its kinked shape lets liquid through during the pressure test if the joint has been left unpressed, and the orange strip shows the pressing status. To seal the thread, the system instructions recommend chloride-free materials, for example chloride-free Teflon tape. Installation should be carried out by a professional according to the system manufacturer's instructions; before commissioning the heating, the system must be flushed, and the manufacturer recommends GEL.LONG LIFE 100 for water treatment.
The IVAR.IVN462 range covers sizes from 15 mm – Rp 1/2" to 54 mm – Rp 2".
Technical data
| Code | IVN462.5420 |
| Manufacturer | IVAR |
| Type | IVAR.IVN462 |
| Pipe size (d) | 54 mm |
| Female thread | Rp 2" |
| Connection | press end × female thread |
| Overall length (L) | 95 mm |
| Material | stainless steel AISI 304 (1.4301), brass |
| Press end seal | EPDM O-ring (LBP) |
| Max. operating pressure | PN 16 |
| Operating temperature | -20 °C to +120 °C |
| Press jaw profile | M |
| Press indicator | orange strip |
| Drinking water | not suitable |
Frequently asked questions
What can be connected with the IVAR.IVN462 54 mm – Rp 2" union?
A valve or fitting with a male thread is screwed into the Rp 2" female thread, and the other end is pressed onto a 54 mm stainless steel pipe. The union is intended, for example, for closed heating and cooling systems.
What should the threaded joint be sealed with?
The instructions for the stainless steel press system recommend chloride-free sealing materials – for example chloride-free Teflon tape or hemp with a chloride-free sealing paste.
How can an unpressed joint be recognised?
The LBP O-ring with its kinked profile lets liquid through during the pressure test as long as the joint is not pressed, and the orange strip signals pressing. Pressing is done with M-profile jaws.
Is the union suitable for drinking water?
No, the union bears a symbol indicating that it is not suitable for drinking water. It is used in closed heating and cooling circuits, solar systems, and for compressed air or technical gases.
Additional parameters
| Category: | IVAR.IVN60,IVN61,IVN62,IVN64 - connecting unions |
|---|---|
| Warranty: | 2 years |
| Fitting type: | union |
| Pipe diameter: | 54 mm, 110 mm or more |
| System material: | stainless steel AISI 316 |
| Code: | IVN462.5420 |
| Manufacturer: | IVAR |
| Type: | IVAR.IVN462 |
| Pipe size (d): | 54 mm |
| Female thread: | Rp 2" |
| Connection: | press end × female thread |
| Overall length (L): | 95 mm |
| Material: | stainless steel AISI 304 (1.4301), brass |
| Press end seal: | EPDM O-ring (LBP) |
| Max. operating pressure: | PN 16 |
| Operating temperature: | -20 °C to +120 °C |
| Press jaw profile: | M |
| Press indicator: | orange strip |
| Drinking water: | not suitable |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.