IVAR BRA.F15.100 flanged pressure reducing valve – DN 50, L = 230 mm
Code: F15100050Product detailed description
Application
The valve feeds a low-pressure network from a high-pressure one, protects sensitive parts of a system and keeps the pressure below the permitted maximum in sanitary pipework. In compressed-air circuits it holds a steady pressure despite the swings caused by compressors, and downstream of receivers it lowers and stabilises the pressure in the distribution network.
Features
- pressure class PN 10/16, max. pressure 16 bar, operating temperature 0 to +70 °C
- outlet pressure 1.5 to 6 bar (blue spring); the 5 to 12 bar range (red spring) is available to order
- EN GJL 450 cast iron body, stainless steel internals and bolts, NBR seal, RAL 5002 epoxy coating
- pressure ports for measuring inlet and outlet pressure
- a large expansion chamber lowers noise and resists cavitation, a self-cleaning piston keeps maintenance down
- DN 50: face-to-face length 230 mm, Kv 20 m³/h, weight 12 kg
Installation and operation
Install the valve in horizontal pipework only and fit a filter upstream of it. The pressure reduction ratio should not exceed 5:1. Installation and setting should be carried out by a qualified contractor.
Technical data
| Code | F15100050 |
| Manufacturer | IVAR |
| Type | BRA.F15.100 PN10/16 |
| Nominal size | DN 50 |
| Face-to-face length | 230 mm |
| Max. pressure | 16 bar |
| Outlet pressure | 1.5 to 6 bar (standard) |
| Temperature range | 0 °C … +70 °C |
| Flanges | EN 1092-1 / ISO 7005, PN 10/16 |
| Body material | cast iron EN GJL 450 |
| Seal | NBR |
| Kv | 20 m³/h |
| Weight | 12 kg |
| Installation | horizontal pipework only |
Frequently asked questions
Where is the BRA.F15.100 reducing valve installed and what must go upstream?
The valve belongs in horizontal pipework only. According to the datasheet, a filter must be installed upstream of it.
What outlet pressure can be set?
In the standard version 1.5 to 6 bar with the blue spring. The 5 to 12 bar range with the red spring is available to order, and the pressure reduction ratio should not exceed 5:1.
Which media is the valve intended for?
For water in heating, air-conditioning and water distribution systems and for compressed air, at 0 to +70 °C. The datasheet lists a drinking-water approval.
Additional parameters
| Category: | BRA.F15.100 PN10/16 - Flanged pressure reducing valve |
|---|---|
| Warranty: | 2 years |
| Weight: | 12 kg |
| Code: | F15100050 |
| Manufacturer: | IVAR |
| Type: | BRA.F15.100 PN10/16 |
| Nominal size: | DN 50 |
| Face-to-face length: | 230 mm |
| Max. pressure: | 16 bar |
| Outlet pressure: | 1.5 to 6 bar (standard) |
| Temperature range: | 0 °C … +70 °C |
| Flanges: | EN 1092-1 / ISO 7005, PN 10/16 |
| Body material: | cast iron EN GJL 450 |
| Seal: | NBR |
| Kv: | 20 m³/h |
| Weight: | 12 kg |
| Installation: | horizontal pipework only |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
