Protherm - Elbow Ø 60/100 mm – 90°
Code: 0020257009Related products
Product detailed description
Part of the coaxial system for discharging flue gases and drawing in combustion air for a condensing boiler - flue gases leave through the inner pipe, while the outer sleeve draws in the air needed for combustion. This part extends the flue run to the exact length required, or changes its direction.
Protherm Elbow Ø 60/100 mm – 90°
- Coaxial flue elbow with dimensions 60/100 mm, Protherm brand, designed for condensing boilers.
- Pressure loss: 1 Em
Set contents:
- 1 × 90° elbow
- 1 × seal Ø 60 mm
- 1 × clamp Ø 100 x 70 mm
- fixing material
FAQ
- How can I check that the „Protherm - Elbow Ø 60/100 mm – 90°“ fits my exact appliance? The most reliable way is to compare the exact type/catalogue designation on your appliance's rating plate (boiler, cylinder, water heater) with the compatibility stated directly in this product's name (PROTHERM brand) and in its technical parameters above. If in doubt, send us the exact type designation of your appliance (including the serial number, if available) - we will be happy to verify the compatibility for you.
- Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors or safety components (safety valves, thermal fuses) are usually dimensioned precisely to the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - the wrong part can cause reduced functionality, leaks, or in the case of safety components, a real safety risk.
- Must this part be installed by a professional? With simpler, mechanical parts (e.g. seals, covers, small accessories with no connection to electricity, gas or the pressurised section), a handy DIY enthusiast can usually manage the replacement after disconnecting the appliance from power and the supply lines. For any intervention in the gas, electrical or pressurised part of the appliance (e.g. sensors located directly in the combustion chamber, safety valves, electrical modules), however, we always recommend a service technician - especially where the intervention could affect the validity of the warranty on the whole appliance.
- How do I know this part is worn and needs to be replaced? Common symptoms are visible wear/cracking (for seals and rubber parts), water or flue gas leaking at the part, an error message on the control display (for sensors and electronic modules), or a clearly reduced functionality of the appliance (e.g. irregular combustion for burner parts). If in doubt, the safest option is to have the condition assessed by a service technician during the regular annual inspection.
- Is it worth keeping this part at home as a spare? For parts that are normally subject to wear (seals, fuses, small mechanical components) and whose failure would mean a shutdown of heating or hot water production, keeping a spare on hand is a sensible precaution - especially for an older appliance, for which it may be harder to obtain the part quickly.
Additional parameters
| Category: | Protherm |
|---|---|
| Warranty: | 2 years |
| Weight: | 5 kg |
| Pressure loss: | 1 Em |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
rado
atria
rado
atria
rado
rado
atria
About the company
The company Protherm Production is part of the Vaillant Group and is a manufacturer of heating technology for many countries in Europe, Asia and Africa. For the Slovak market, it produces boilers of the Vaillant and Protherm brands. Protherm Production is not only a production plant. It also includes one of the most modern research and development centres, a testing centre and a distribution and logistics centre for Central and Eastern Europe.
The company's beginnings date back to 1991, when it operated as a seller of heating technology in Prague. Production in Skalica was initially launched in the company Didaktik, from where it was moved to the premises of the current plant in 1999. Since 2001, it has been part of the German Vaillant Group.
Three Slovak entities: The Vaillant Group employs more than 1,800 people in Slovakia. In addition to the plant in Skalica, it also owns the company Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces hydraulic modules and pipes. The sales organisation for the Slovak market is the company Vaillant Group Slovakia, which also ensures further customer care and servicing of the products offered.
The Vaillant Group has a history of over 140 years and more than 2,000 patents. It is a leader and pioneer in the field of heating technologies in Europe. It has 10 production plants worldwide (eight in Europe, one in Turkey and one in China) and more than 12,000 employees. It produces equipment under the brands Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm and Hermann.
Milestones in Protherm Production 2017 – Record: half a million products produced in 2017
2016 – Opening of the new visitor centre
2015 – Opening of the new testing centre
2013 – Creation of the central logistics warehouse East Hub
2011 – Launch of production of suspended non-condensing boilers
2005 – Specialisation in all stationary boilers
2001 – Integration into the German Vaillant Group
2000 – Start of production with three assembly lines
Production
Protherm Production produces a wide range of boilers and hot water heating equipment. These include suspended and stationary, condensing and non-condensing boilers, electric boilers, electric water heaters for hot water preparation and indoor units of heat pumps. Products of the following brands are produced at the plant in Skalica:
The most modern electronic work processes are used in Protherm Production, which makes it relatively easy to assemble heating equipment on the production lines. The work process on LCD screens guides employees through the entire assembly process, in both text and visual form. This intelligent electronic system makes production easier and helps avoid errors. In the case of incorrect use of components, it alerts us and stops the assembly of the product on the line.
The production halls of the plant in Skalica are bright, clean and quiet spaces. The goal of Protherm Production is to become a green production facility, so it invests significant financial resources into ecological solutions, innovations and focuses on energy saving.
Research and development centre
One of the most modern research and development centres in Europe is part of Protherm Production. The company can boast of a top-class research and development centre with powerful workstations, a modern laboratory and high-quality equipment. Members of the development team primarily contribute to innovations in current boilers and the introduction of new, more powerful modules. Ideas for new, more efficient products are born here, the design is optimised to improve quality while maintaining or reducing the price, taking into account new technologies and their implementation. In addition, existing boilers are further refined within the entire Vaillant group.
The main tasks of the research and development centre of the Protherm Production plant are the development of hydraulic modules for boilers, gas condensing and non-condensing boilers and electric boilers. We also find here the team of sustainable engineering (Sustaining Engineering) and the team of project and product management. The final form of the product is created thanks to the close cooperation of the development staff of the Protherm Production company with the developers from other companies in the group.
Recently, new departments have also been created within the research and development centre. One of them is the Intellectual Property Department, whose task is to register new patents. We have also expanded the group of simulation engineers, who are experts in CAE simulations.
The research and development centre currently has 63 employees. It also includes an expanded prototype workshop and a modern testing centre. What our developers design is assembled in the prototype workshop, tested in the laboratory and finally introduced into mass production.
