GeniaAir Classic HA 5-7.1 O, 230V
Code: 8000022216Related products
Product detailed description
GeniaAir Classic HA 5-7.1 O, 230V is the outdoor unit of the monoblock air source heat pump Protherm GeniaAir Classic HA 5-7.1 O, 230V. It is a monoblock version with natural refrigerant R290 (propane) – the entire refrigerant circuit is hermetically sealed directly in the outdoor unit from the factory, and only heating (or possibly hot domestic) water is led into the house.
Technical specifications
- Performance range in heating mode: 5.4 /8.1 kW (rated / maximum power, approximately under reference conditions A7/W35 according to EN 14511)
- Refrigerant: R290 (propane) – a natural refrigerant with a very low global warming potential (GWP ≈ 3), thanks to which the unit achieves the highest energy efficiency class without the need to compromise between performance and environmental friendliness
- Energy efficiency class: A+++ (ErP, low-temperature application)
- Configuration: monoblock, outdoor installation ("O"), power supply 230 V
- Indoor part: not included in the package – added separately (hydraulic module, or possibly a set with GeniaSet)
- Approximate weight: approx. 78 kg
Outdoor unit only
This item represents the outdoor monoblock unit GeniaAir Classic HA 5-7.1 O, 230V without the indoor accessories. It is suitable mainly for customers who already have selected or installed a hydraulic module, or who want to combine the unit with their own solution for regulation and heat distribution. If you are looking for a complete solution including the indoor part and controller, our offer also includes the corresponding set with a hydraulic module and Mipro Sense controller for the same power class.
Why a monoblock with refrigerant R290
The monoblock configuration has the advantage of simpler and faster installation compared to a split system – since the refrigerant circuit is hermetically sealed and filled from the factory, there is no need to interfere with the refrigerant circuit on site during installation. Refrigerant R290 (propane) is a natural substance with minimal impact on the environment, which at the same time allows the unit to operate with high efficiency even at lower outdoor temperatures, which is reflected in the achieved energy efficiency class A+++.
Installation and service
Despite the simpler installation compared to split systems, we recommend that installation, hydraulic connection and commissioning be carried out by an authorized Protherm service partner – this is a condition for the extended warranty after registration of the device with the manufacturer. Before ordering, we recommend checking the heat loss of the building to ensure that the selected power range corresponds to the actual heating and hot water needs.
Placement and operation of the outdoor unit
We recommend placing the monoblock unit on a solid, flat and sufficiently load-bearing base (concrete slab or consoles anchored to the façade) with anti-vibration pads that limit the transmission of vibration to the building structure. It is necessary to ensure free space for air intake and exhaust according to the manufacturer's installation instructions and to solve the drainage of condensate, which is formed mainly during defrosting cycles at low outdoor temperatures. Since only heating water (not refrigerant) enters the house from the monoblock unit, the pipe between the unit and the house must be well thermally insulated and protected against frost, or optionally equipped with an accompanying heating cable in extreme climatic conditions.
The heat pump operates even at negative outdoor temperatures, but its performance and efficiency (COP) decrease with decreasing outdoor temperature – therefore, during system design, the so-called bivalent point is determined, i.e. the temperature below which (in most installations only a few days a year) an additional heat source may be needed, usually an integrated electric heating element in the hydraulic module.
Compatible accessories
- Internet gateway for connection to the mobile app and remote control
- Hot water storage tank of suitable size (if not part of the set)
- Accumulation (balancing) tank for multi-zone systems or low-flow water systems
- Set for multi-zone heating regulation
- Anti-vibration and mounting consoles or base plate for the outdoor unit
- Accompanying heating cable for the pipe between the unit and the house in exposed locations
Other frequently asked questions
Does the heat pump work in the frost? Yes, GeniaAir Classic monoblock units are designed for operation even at significantly negative outdoor temperatures. At low temperatures, automatic defrosting cycles of the outdoor heat exchanger and a slight decrease in achievable performance occur, which is a common feature of all air source heat pumps.
Why choose a monoblock instead of a split system? A monoblock is suitable especially where a simpler and faster installation without interference with the refrigerant circuit on site is preferred, or where a certified refrigeration technician is not available for the installation of a split system. The disadvantage is the need for thorough insulation of the water pipe between the unit and the house against freezing.
Frequently asked questions
What is the difference between the "split" and "monoblock" configurations? In a split system, the refrigerant circuit is divided between the outdoor and indoor units, which are connected by refrigerant piping. Inside the house, refrigerant does not flow, but only heating (or possibly hot domestic) water through the hydraulic module. In a monoblock, the entire refrigerant circuit is sealed in the outdoor unit and only heating water leads into the house – installation is simpler and does not require work with refrigerant directly at the installation site.
Can this heat pump be used as the only heat source? Yes, with a proper energy design (heat loss of the building, low-temperature heating system – floor heating or larger radiators), this set is designed as a monovalent heat source for heating and hot water. We recommend verifying the exact sizing with our technician according to the specific building.
Is a hot water storage tank needed? In sets with GeniaSet, the tank is integrated directly into the indoor unit. In sets with a separate hydraulic module (without GeniaSet), it is necessary to add the TÚV tank separately – we are happy to advise you on choosing the right size.
How is the Mipro Sense controller operated? Mipro Sense is a room control panel with a touch display that allows setting heating and cooling circuits, time programs and monitoring operation. The system is prepared for connection to an internet gateway for remote control via a mobile app (purchased separately, if not part of the set).
What are the service and warranty requirements? We provide the standard legal warranty for the product, and we recommend extended warranty through registration with the manufacturer after professional installation by an authorized Protherm service partner.
Additional parameters
| Category: | GeniaAir / GeniaSet (Protherm) |
|---|---|
| Warranty: | 2 years |
| Weight: | 82 kg |
| Brand: | Protherm |
| Series: | GeniaAir Classic |
| Refrigerant: | R290 |
| Energy Efficiency Class: | A+++ |
| Power Range (kW): | 5.4 / 8.1 |
| Finishing: | Monoblock (external installation) |
| Weight: | 78.000 kg (approx.) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The company Protherm Production is part of the Vaillant Group and is a manufacturer of heating technology for many countries in Europe, Asia and Africa. For the Slovak market, it produces boilers of the Vaillant and Protherm brands. Protherm Production is not only a production plant. It also includes one of the most modern research and development centres, a testing centre and a distribution and logistics centre for Central and Eastern Europe.
The company's beginnings date back to 1991, when it operated as a seller of heating technology in Prague. Production in Skalica was initially launched in the company Didaktik, from where it was moved to the premises of the current plant in 1999. Since 2001, it has been part of the German Vaillant Group.
Three Slovak entities: The Vaillant Group employs more than 1,800 people in Slovakia. In addition to the plant in Skalica, it also owns the company Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces hydraulic modules and pipes. The sales organisation for the Slovak market is the company Vaillant Group Slovakia, which also ensures further customer care and servicing of the products offered.
The Vaillant Group has a history of over 140 years and more than 2,000 patents. It is a leader and pioneer in the field of heating technologies in Europe. It has 10 production plants worldwide (eight in Europe, one in Turkey and one in China) and more than 12,000 employees. It produces equipment under the brands Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm and Hermann.
Milestones in Protherm Production 2017 – Record: half a million products produced in 2017
2016 – Opening of the new visitor centre
2015 – Opening of the new testing centre
2013 – Creation of the central logistics warehouse East Hub
2011 – Launch of production of suspended non-condensing boilers
2005 – Specialisation in all stationary boilers
2001 – Integration into the German Vaillant Group
2000 – Start of production with three assembly lines
Production
Protherm Production produces a wide range of boilers and hot water heating equipment. These include suspended and stationary, condensing and non-condensing boilers, electric boilers, electric water heaters for hot water preparation and indoor units of heat pumps. Products of the following brands are produced at the plant in Skalica:
The most modern electronic work processes are used in Protherm Production, which makes it relatively easy to assemble heating equipment on the production lines. The work process on LCD screens guides employees through the entire assembly process, in both text and visual form. This intelligent electronic system makes production easier and helps avoid errors. In the case of incorrect use of components, it alerts us and stops the assembly of the product on the line.
The production halls of the plant in Skalica are bright, clean and quiet spaces. The goal of Protherm Production is to become a green production facility, so it invests significant financial resources into ecological solutions, innovations and focuses on energy saving.
Research and development centre
One of the most modern research and development centres in Europe is part of Protherm Production. The company can boast of a top-class research and development centre with powerful workstations, a modern laboratory and high-quality equipment. Members of the development team primarily contribute to innovations in current boilers and the introduction of new, more powerful modules. Ideas for new, more efficient products are born here, the design is optimised to improve quality while maintaining or reducing the price, taking into account new technologies and their implementation. In addition, existing boilers are further refined within the entire Vaillant group.
The main tasks of the research and development centre of the Protherm Production plant are the development of hydraulic modules for boilers, gas condensing and non-condensing boilers and electric boilers. We also find here the team of sustainable engineering (Sustaining Engineering) and the team of project and product management. The final form of the product is created thanks to the close cooperation of the development staff of the Protherm Production company with the developers from other companies in the group.
Recently, new departments have also been created within the research and development centre. One of them is the Intellectual Property Department, whose task is to register new patents. We have also expanded the group of simulation engineers, who are experts in CAE simulations.
The research and development centre currently has 63 employees. It also includes an expanded prototype workshop and a modern testing centre. What our developers design is assembled in the prototype workshop, tested in the laboratory and finally introduced into mass production.
