GeniaAir / GeniaSet (Protherm)
Heat pumps Protherm GeniaAir (Split, Classic, Max) with hydraulic module GeniaSet — complete solution for heating, cooling and preparation of hot water.
Product sorting
List of products
An 18-litre buffer tank for increasing the water volume of a heating system with a...
A 45-litre buffer tank for increasing the water volume of a heating system with a...
Expansion vessel with with a volume of 8 l for cylinder hot water internal unit...
Expansion vessel with objemom 8 l for tank teplej water internal unit GeniaSet,...
Antifreeze heat-transfer fluid for the primary circuit of the Protherm GeniaAir...
A 100-litre buffer (balancing) tank, model VNR 100 M, for systems with a heat pump.
A 200-litre buffer (balancing) tank, model FNR 200 B, for systems with a heat pump.
Circulation connection kit without circulation pump for the GeniaSet Split module...
Circulation connection set with circulation pump for internal unit GeniaSet Split,...
Circulation kit with hot water circulation pump for GeniaAir/GeniaSet systems,...
Connection adapter 1" / 28 mm with 1" male thread for the GeniaAir wall-mounted...
Connecting kit with nut (detachable connection) for heat pump GeniaAir Mono, brand...
Connection kit for side connection of the heating circuit to the Protherm GeniaSet...
Pripojovacia set na prepojenie modulu GeniaSet with the outdoor unit circuit...
Indirectly heated domestic hot water tank FEW 200/2 B with a capacity of 200 l for...
Indirectly heated domestic hot water tank FEW 250/2 B with a capacity of 250 l for...
Expansion vessel 2 l for primarny okruh tepelneho cerpadla Protherm GeniaAir,...
External current (sacrificial) anode with connecting accessories for cylinder hot...
Kit 2 ks external zone valves for control multi-zone heating system with thermal...
Filling set with thermostatic mixing ventilom for internal unit GeniaSet Split,...
The Protherm GeniaAir Classic HA 11-7.1 O is an air-to-water heat pump with a...
Protherm GeniaAir Classic HA 5-7.1 O, 230V is an air-to-water heat pump with a...
The GeniaAir Split, Classic and Max units differ in performance range and the design of the outdoor unit. The hydraulic module GeniaSet (optionally with the Mipro Sense controller) ensures control of the heating circuit and hot water preparation — an external tank can be added or the built-in 190 l tank located directly in the indoor unit can be used.
Frequently asked questions
- What is the difference between GeniaAir Split, Classic and Max? Split has a separated outdoor and indoor unit connected by refrigerant, Classic and Max are monoblock versions with different performance ranges and efficiency (Max is intended for more demanding installations with higher COP).
