Zostava GeniaAir Split HA 10-5 + GeniaSet + Mipro Sense

Product detailed description

The GeniaAir Split HA 10-5 + GeniaSet + Mipro Sense set is a complete air-source heat pump set from Protherm GeniaAir in the "Split" configuration (outdoor and indoor unit), built on a common technological platform of the Vaillant Group – the same one used for the Vaillant aroTHERM Split series. The outdoor unit HA 10-5 operates with refrigerant R410a and in this configuration achieves energy efficiency class A+++ A for low-temperature heating (floor heating, or oversized radiators).

Technical specifications

• Power range in heating mode: 10.2 / 13.9 kW (rated / maximum power, approximately under standard reference conditions A7/W35 according to EN 14511)
• Refrigerant: R410a – a proven refrigerant used in higher-performance units of the HA-5 series.
• Energy efficiency class: A+++ A (ErP, low-temperature application)
• Configuration: Split – outdoor unit connected by refrigerant piping to the indoor unit
• Indoor unit: GeniaSet (integrated hot water storage tank, circulation pump, expansion vessel)
• Control: indoor control panel Mipro Sense
• Estimated weight of the set: approx. 180 kg (sum of the outdoor and indoor unit, exact weight according to the specific packaging configuration)
• Power supply: according to power class 230 V or 400 V (further connection parameters to be consulted at the time of order)

What is included in the set

The GeniaAir Split HA 10-5 + GeniaSet + Mipro Sense set includes the outdoor unit HA 10-5 and is complemented by the indoor unit GeniaSet – a compact combined module that in one housing integrates the hydraulic connection of the circuit, built-in hot water storage tank, expansion vessel, circulation pump and safety components. This solution is intended for installations where a compact all-in-one solution with minimal space requirements in the technical room is sought. It also includes the indoor controller Mipro Sense for comfortable setting and monitoring of operation directly from the living space. The refrigerant piping between the outdoor and indoor unit, its insulation and possibly an internet gateway for remote control via a mobile app are added separately according to the length of the route and customer requirements.

Why GeniaAir split heat pump

The split configuration has an advantage over the monoblock in that refrigerant does not flow through the indoor unit, only heating (and possibly hot water) – thus eliminating the risk of freezing of water in the external part of the circuit at extremely low temperatures and also reducing the noise transmitted to the building structure, since the compressor is entirely located outdoors. The GeniaAir Split series is intended mainly for new builds and renovations with a low-temperature heating system, where emphasis is placed on high seasonal efficiency (SCOP) and energy efficiency class A+++ A.

Installation and service

We recommend that the installation of the heat pump, connection of the refrigerant circuit and commissioning be entrusted exclusively to an authorized Protherm service partner – only in this way is proper functionality and the right to an extended warranty after registration of the device with the manufacturer guaranteed. Before installation, it is necessary to verify the heat loss of the building and choose the correct size of the heating circuit (floor heating, or low-temperature radiators) so that the pump operates in an optimal operating point with the highest efficiency.

Placement and operation of the outdoor unit

We recommend placing the outdoor unit on a solid, flat and sufficiently load-bearing base (concrete slab or consoles anchored to the façade) with anti-vibration pads that limit the transmission of vibration to the building structure. It is necessary to ensure free space in front of the air intake and exhaust (according to the manufacturer's installation instructions) and to drain the condensate, which is formed mainly during the defrosting cycle at negative temperatures. When designing the placement, it is also necessary to take into account noise requirements – especially when installing in close proximity to neighboring properties or residential areas, where the required distances according to the current noise legislation must be maintained.

The heat pump operates even at negative outdoor temperatures, but its performance and efficiency (COP) decrease with decreasing outdoor temperature – therefore, when designing the system, the so-called bivalent point is determined, i.e. the temperature below which (in most installations only a few days a year) an additional heat source may be required, usually an integrated electric heating element in the hydraulic module.

Compatible accessories

• Internet gateway for connection to a mobile app and remote control
• Hot water storage tank of suitable size (for sets without an integrated storage tank)
• Accumulation (balancing) tank for multi-zone systems or systems with low water flow
• Kit for multi-zone heating control (e.g. combination of floor heating and radiators in different zones of the house)
• Anti-vibration and mounting consoles or base plate for the outdoor unit

Other frequently asked questions

Does the heat pump work in the frost? Yes, units of the GeniaAir series are designed for operation even at significantly negative outdoor temperatures. At low temperatures, automatic defrosting cycles of the outdoor heat exchanger and a slight decrease in the achieved performance and efficiency occur, which is a common property of all air-source heat pumps.

Can the heat pump be used for cooling in summer? With a suitable heating system (especially floor heating with active or passive cooling), it is possible to use the cooling function in some configurations – the exact possibility and method of connection is recommended to be consulted with our technician when designing the system.

Frequently asked questions

What is the difference between the "split" and "monoblock" configuration? In the split system, the refrigerant circuit is divided between the outdoor and indoor unit, which are connected by refrigerant piping. Inside the house, only heating (or possibly hot water) flows through the hydraulic module. In the monoblock, the entire refrigerant circuit is enclosed in the outdoor unit and only heating water leads into the house – the installation is simpler and does not require work with refrigerant directly at the installation site.

Can this heat pump be used as the only heat source? Yes, with a proper energy design (heat loss of the building, low-temperature heating system – floor heating or larger radiators), this set is designed as a monovalent heat source for heating and hot water. We recommend verifying the exact sizing with our technician according to the specific building.

Is a hot water storage tank needed? In sets with GeniaSet, the storage tank is integrated directly in the indoor unit. In sets with a separate hydraulic module (without GeniaSet), it is necessary to add the hot water storage tank separately – we are happy to advise you on the selection of the appropriate size.

How is the Mipro Sense controller operated? Mipro Sense is an indoor control panel with a touch display, which allows setting of heating and cooling circuits, time programs and monitoring of operation. The system is prepared for connection to an internet gateway for remote control via a mobile app (purchased separately, if not part of the set).

What are the service and warranty requirements? We provide standard statutory warranty for the product, extended warranty is recommended to be handled by registration with the manufacturer after professional installation by an authorized Protherm service partner.