Protherm HelioSet 2.250C HT
Code: NC-1332Product detailed description
Complete solar systems with two flat vertical collectors, a 250l hot water tank and accessories, a pressure-free drainback-type system. - Protherm HelioSet 2.250C HT
- Complete solar system
- Model with horizontal collectors
- Pressure-free innovative solution - reliable and easy to install
- Significant reduction in hot water heating costs using solar energy
- THE SOLAR COLLECTORS MUST BE STACKED ONE ABOVE THE OTHER
Solar energy - energy without bills
HelioSet are complete solar systems that enable the preparation of domestic hot water using solar energy. These systems are designed to work together with gas boilers. HelioSet systems are based on unique operating principles - with the solar fluid draining freely back into the solar exchanger. The advantage of this solution is a compact system, simplified installation and reliability - there is no risk of the fluid overheating in summer or the solar fluid freezing in winter.
Use:
- The solar system allows the use of solar energy to prepare or pre-heat domestic hot water. This can cover up to 60% of the annual hot water demand (in summer - up to 100%) - the hot water is prepared free of charge.
- HelioSet is a cost-effective solution for smaller installations, where the height difference between the bottom of the tank and the top of the solar collector does not exceed 8.5 m (up to 12 m when using an additional pump for the solar fluid). The system is supplied in two versions.
- The HelioSet 2.250 system is designed to meet the needs of a larger number of users. The set is designed to work together with a heating-only boiler, which reheats the solar tank in unfavourable weather or during winter operation.
Models:
- HelioSet 2.250 VT - a set of 2 vertical flat solar collectors, a 250 l hot water tank and accessories.
- The solar exchanger is pre-filled with solar fluid. The systems are fully equipped and ready for installation - no additional equipment needs to be connected*
* Depending on the type of roof covering and the distance between the tank and the collectors, you need to order solar collector mounting brackets ( sets of brackets are available for various types of covering and roof types) and solar fluid connecting pipes between the collectors and the tank, available in lengths of 10 or 20 m.
Additional parameters
| Category: | solar sets |
|---|---|
| Warranty: | 2 years |
| Product replaced by new one: | https://www.atria.sk/solarna-zostava-hewalex-c--i-s-nosice-pre-sklon-strechy-15-az-30/ |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The company Protherm Production is part of the Vaillant Group and is a manufacturer of heating technology for many countries in Europe, Asia and Africa. For the Slovak market, it produces boilers of the Vaillant and Protherm brands. Protherm Production is not only a production plant. It also includes one of the most modern research and development centres, a testing centre and a distribution and logistics centre for Central and Eastern Europe.
The company's beginnings date back to 1991, when it operated as a seller of heating technology in Prague. Production in Skalica was initially launched in the company Didaktik, from where it was moved to the premises of the current plant in 1999. Since 2001, it has been part of the German Vaillant Group.
Three Slovak entities: The Vaillant Group employs more than 1,800 people in Slovakia. In addition to the plant in Skalica, it also owns the company Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces hydraulic modules and pipes. The sales organisation for the Slovak market is the company Vaillant Group Slovakia, which also ensures further customer care and servicing of the products offered.
The Vaillant Group has a history of over 140 years and more than 2,000 patents. It is a leader and pioneer in the field of heating technologies in Europe. It has 10 production plants worldwide (eight in Europe, one in Turkey and one in China) and more than 12,000 employees. It produces equipment under the brands Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm and Hermann.
Milestones in Protherm Production 2017 – Record: half a million products produced in 2017
2016 – Opening of the new visitor centre
2015 – Opening of the new testing centre
2013 – Creation of the central logistics warehouse East Hub
2011 – Launch of production of suspended non-condensing boilers
2005 – Specialisation in all stationary boilers
2001 – Integration into the German Vaillant Group
2000 – Start of production with three assembly lines
Production
Protherm Production produces a wide range of boilers and hot water heating equipment. These include suspended and stationary, condensing and non-condensing boilers, electric boilers, electric water heaters for hot water preparation and indoor units of heat pumps. Products of the following brands are produced at the plant in Skalica:
The most modern electronic work processes are used in Protherm Production, which makes it relatively easy to assemble heating equipment on the production lines. The work process on LCD screens guides employees through the entire assembly process, in both text and visual form. This intelligent electronic system makes production easier and helps avoid errors. In the case of incorrect use of components, it alerts us and stops the assembly of the product on the line.
The production halls of the plant in Skalica are bright, clean and quiet spaces. The goal of Protherm Production is to become a green production facility, so it invests significant financial resources into ecological solutions, innovations and focuses on energy saving.
Research and development centre
One of the most modern research and development centres in Europe is part of Protherm Production. The company can boast of a top-class research and development centre with powerful workstations, a modern laboratory and high-quality equipment. Members of the development team primarily contribute to innovations in current boilers and the introduction of new, more powerful modules. Ideas for new, more efficient products are born here, the design is optimised to improve quality while maintaining or reducing the price, taking into account new technologies and their implementation. In addition, existing boilers are further refined within the entire Vaillant group.
The main tasks of the research and development centre of the Protherm Production plant are the development of hydraulic modules for boilers, gas condensing and non-condensing boilers and electric boilers. We also find here the team of sustainable engineering (Sustaining Engineering) and the team of project and product management. The final form of the product is created thanks to the close cooperation of the development staff of the Protherm Production company with the developers from other companies in the group.
Recently, new departments have also been created within the research and development centre. One of them is the Intellectual Property Department, whose task is to register new patents. We have also expanded the group of simulation engineers, who are experts in CAE simulations.
The research and development centre currently has 63 employees. It also includes an expanded prototype workshop and a modern testing centre. What our developers design is assembled in the prototype workshop, tested in the laboratory and finally introduced into mass production.
