5″ submersible borehole pump with float switch DAB PULSAR 30/50 M-A (60210489) – SALE

Code: 60210489
Action
Not rated Rating details
1 027,05 € –40 %
PULSAR 30/50 M-A ponorné 5" čerpadlo do vrtov a studní - 1x230V – AKCIA
1 027,05 € –40 % 611,62 € / pcs 497,25 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Pump 60210489 (PULSAR 30/50 M-A) has an AISI 304 stainless steel casing; the impellers, diffusers, filter and oil bath are technopolymer. The hydraulic section sits below the motor, which is cooled by the liquid flowing past it. The double mechanical seal with an oil chamber and the roller bearings are designed for continuous duty; the single-phase motor has resettable thermal protection and a built-in capacitor.

Technical data

  • Body material: stainless steel AISI 304
  • Impellers: technopolymer
  • Discharge connection: 5/4″
  • Flow rate (series): 0.9 – 7.2 m³/h
  • Delivery head (series): 88 m
  • Max. immersion depth: 20 m
  • Liquid temperature: 0 °C … +40 °C
  • Power supply: 1 × 230 V, 50 Hz
  • Protection / insulation class: IP 68 / F
  • Power cable: 15 m H07RN-F
  • Version: A – automatic operation with float switch

The discharge connection is 5/4″, the lower part carries a suction filter and the maximum pump diameter is 138 mm. The pump handles clean water without solids or abrasives at 0 to +40 °C with a sand content of 50 g/m³ at most. It is installed permanently or as a portable unit, vertically or horizontally. The connection should be left to a qualified company.

Technical data

Code60210489
ManufacturerDAB
TypeDAB.PULSAR
Body materialstainless steel AISI 304
Impellerstechnopolymer
Discharge connection5/4″
Flow rate (series)0.9 – 7.2 m³/h
Delivery head (series)88 m
Max. immersion depth20 m
Liquid temperature0 °C … +40 °C
Power supply1 × 230 V, 50 Hz
Protection / insulation classIP 68 / F
Power cable15 m H07RN-F
VersionA – automatic operation with float switch

Frequently asked questions

What is the difference between versions A and NA?
A is the automatic version with a float, NA is the version without one. This code (60210489) is version A.

How deep can the pump be immersed?
The maximum immersion depth is 20 m; the pump comes with 15 m of H07RN-F cable.

Can the pump handle water containing sand?
The sand content should not exceed 50 g/m³; the pumped water should be clean, without solids or abrasives.

Additional parameters

Category: DAB.PULSAR(FM) - submersible 5" pumps for boreholes and wells
Warranty: 24
Code: 60210489
Manufacturer: DAB
Type: DAB.PULSAR
Body material: stainless steel AISI 304
Impellers: technopolymer
Discharge connection: 5/4″
Flow rate (series): 0.9 – 7.2 m³/h
Delivery head (series): 88 m
Max. immersion depth: 20 m
Liquid temperature: 0 °C … +40 °C
Power supply: 1 × 230 V, 50 Hz
Protection / insulation class: IP 68 / F
Power cable: 15 m H07RN-F
Version: A – automatic operation with float switch

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.