PUSH elbow 90° - female thread - 20x3/4"F
Code: 87320793Related products
Product detailed description
Push elbow 90° - female thread, IVAR.PUSH - KF, size: 20 x 3/4" F, pack: 10 pcs
- PN 10, T = +120 °C
- for easy connection of ALPEX pipe to a male thread without the use of pressing tools
- material: brass CW617N, stainless steel sleeve, EPDM seal
Frequently Asked Questions
- What tools do I need to install this fitting? Press fittings require specialized pressing pliers with the correct jaw type (commonly marked B, F or TH depending on the system) matching the size and type of the fitting - without the correct tool the joint cannot be made or checked.
- How do I know the joint has been pressed correctly? Quality press fittings have a press indicator (e.g. a sealing O-ring that leaks if pressing is incomplete) - before embedding the joint in a wall or screed, a pressure test of the whole system should always be carried out.
- Can the joint be taken apart after pressing? No, unlike a screwed (compression) connection, a pressed joint is permanent and taking it apart requires cutting out the fitting and replacing it with a new one.
- Must installation be carried out by a professional? Yes, pressing fittings requires professional skill and correctly calibrated tools - we recommend leaving it to a heating engineer/plumber, especially for joints that will be embedded in a wall or screed without the possibility of later inspection.
Additional parameters
| Category: | elbows PUSH 90° - ext. and int. thread |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.108 kg |
| EAN: | 4013960355819 |
| Material type: | brass CW617N |
| Operating temperature: | +120 °C |
| Nominal pressure: | PN 10 |
| Last price update: | 03.06.2026 1:06:44 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
G
Gábor
Gábor
Jó napot kívánok, egy régebbi fűtési rendszer felújítása során szeretném alkalmazni ezt a könyökidomot, és az érdekelne, hogy a 20 mm-es PUSH csatlakozás és a 3/4"-os belső menet kombinációja kompatibilis-e a szokványos réz menetescsövekkel, amelyek a meglévő kazáncsatlakozón találhatók.
A
ATRIA.SK
ATRIA.SK
Szia! A 3/4"-os belső menet igen, illik a szabványos réz menetescsövekre, ez egy általános méret, szóval ott nem lesz gond. A 20 mm-es PUSH oldal viszont csak műanyag vagy kompozit csővel működik együtt, rézcső ott nem jön szóba. Ha vegyes rendszered van, érdemes megnézni az átmeneti idomokat is, amelyek réz és PUSH között teremtenek kapcsolatot.