Room control panel IVAR.STOUCH for SMARTY ventilation units – SALE
Code: IVACC000757Related products
Product detailed description
What it is for
The IVAR.STOUCH is a room panel for everyday control of a SMARTY ventilation unit with an MCB or miniMCB control board. It can also be used with EC-motor fans and with equipment controlled via the Modbus protocol. The display shows the set and supply air temperature, the selected speed and fault or maintenance messages. The housing is plastic and the display is toughened glass.
Functions
- on and off, choice of four ventilation speeds
- boost – temporary operation at maximum speed, up to 300 minutes
- temperature setting, night mode and child lock
- 0 – 10 V DC output for fan control and 0 – 10 V DC input for a CO2 or pressure sensor
- can be connected to a BMS network
Installation and power supply
The panel is screwed to the wall; connect it to the ventilation unit only with the supplied 13 m cable. It is powered at 24 V AC/DC. When connected to other equipment, the power supply is not included. The electrical connection must only be made by a person with an electrical qualification.
Technical data
| Code | IVACC000757 |
| Brand | IVAR |
| Type | IVAR.STOUCH |
| Product type | room control panel |
| Application | SMARTY ventilation units (MCB/miniMCB), EC fans, Modbus devices |
| Mounting | wall-mounted |
| Supply voltage | 24 V AC/DC |
| Communication | Modbus RS485 |
| Ventilation speeds | 4 + boost |
| Operating temperature | +10 to +30 °C |
| Cable length | 13 m |
| Dimensions (W × D × H) | 84 × 22 × 84 mm |
| Weight | 0.6 kg |
Frequently asked questions
Which functions can be controlled from the panel?
Switching on and off, selecting one of four ventilation speeds, setting the temperature and the temporary maximum output mode (boost). The display also shows alarm codes.
Can the panel be used with equipment other than SMARTY?
Yes, besides SMARTY units with an MCB or miniMCB control board it is designed for EC-motor fans and devices controlled via Modbus. With such a connection, the power supply is not included.
What is in the box?
The control panel with instructions, a 13 m connecting cable and a fixing kit with two screws, two nylon wall plugs and two steel wall plugs.
Additional parameters
| Category: | Accessories for IVAR.PROFI-AIR units |
|---|---|
| Warranty: | 24 |
| Weight: | 0.6 kg |
| Type: | control / sensor |
| Code: | IVACC000757 |
| Brand: | IVAR |
| Type: | IVAR.STOUCH |
| Product type: | room control panel |
| Application: | SMARTY ventilation units (MCB/miniMCB), EC fans, Modbus devices |
| Mounting: | wall-mounted |
| Supply voltage: | 24 V AC/DC |
| Communication: | Modbus RS485 |
| Ventilation speeds: | 4 + boost |
| Operating temperature: | +10 to +30 °C |
| Cable length: | 13 m |
| Dimensions (W × D × H): | 84 × 22 × 84 mm |
| Weight: | 0.6 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.