Wall bracket set for horizontal distribution manifold and hydraulic separator DN 20 – PAW.DR 3121 – SALE
Code: 3121Product detailed description
The PAW.DR 3121 set (code 3121) is a mounting accessory for the DN 20 PAW system. It fixes the PAW.MV20 horizontal distribution manifold together with the PAW.HD hydraulic separator to the wall; the DN 20 HEAT BLOC boiler modules are then connected to them.
- axis distance from the wall adjustable from 70 to 100 mm in 15 mm steps
- material galvanised steel
- two sets are recommended from the PAW.MV5 manifold upwards
Technical data
| Code | 3121 |
| Manufacturer | PAW |
| Type | PAW.DR 3121 |
| Nominal size | DN 20 |
| Suitable for | PAW.MV20 manifold, PAW.HD hydraulic separator |
| Axis distance from wall | 70–100 mm |
| Adjustment step | 15 mm |
| Material | galvanised steel |
| Number of sets from PAW.MV5 | 2 |
Frequently asked questions
How many bracket sets do I need for the PAW.MV20 manifold?
One set is enough for smaller manifolds. From the PAW.MV5 manifold upwards, the manufacturer recommends two PAW.DR 3121 sets.
Which wall distance should I choose?
The manifold axis can be 70 to 100 mm from the wall, in 15 mm steps. The manufacturer recommends the largest possible distance, as the manifold insulation is then easier to fit.
Is the set also suitable for the hydraulic separator?
Yes, the set is designed for fixing both the PAW.MV20 horizontal manifold and the PAW.HD hydraulic separator in DN 20.
Additional parameters
| Category: | accessories |
|---|---|
| Warranty: | 2 years |
| Nominal size (DN): | DN 20 |
| Type: | accessories |
| Code: | 3121 |
| Manufacturer: | PAW |
| Type: | PAW.DR 3121 |
| Nominal size: | DN 20 |
| Suitable for: | PAW.MV20 manifold, PAW.HD hydraulic separator |
| Axis distance from wall: | 70–100 mm |
| Adjustment step: | 15 mm |
| Material: | galvanised steel |
| Number of sets from PAW.MV5: | 2 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!