IVAR.OPM support spacer set for axial pressing of PE-X 10 and 20 mm, 2 pcs
Code: I0000686Related products
Product detailed description
The IVAR.OPM support spacer is an accessory for the IVAR.A-PRESS hand pressing tool. In axial pressing it holds the fitting in the correct position so the joint is pressed accurately.
- set of 2 pieces
- for IVAR.PPSU IC press fittings on PE-X pipe 10 × 1.3 mm and 20 × 2 mm
- the spacer is inserted according to fitting type and pipe size, 10 or 20 mm
- tees and elbows of the same size are pressed with the same spacer
The pressing procedure is described in the IVAR.A-PRESS instructions. Finished joints must be protected from chemicals and from sunlight and UV radiation.
Technical data
| Code | I0000686 |
| Manufacturer | IVAR |
| Type | IVAR.OPM |
| Application | axial pressing of IVAR.PPSU IC fittings |
| Pipe | PE-X 10 × 1.3 mm, 20 × 2 mm |
| Tool | IVAR.A-PRESS |
| Pack size | 2 pcs |
Frequently asked questions
Which tool are the support spacers used with?
The IVAR.A-PRESS hand-held pistol-type axial pressing tool. The tool itself is not included in the set.
Which pipes are they intended for?
PE-X pipes with outer size 10 × 1.3 mm and 20 × 2 mm, with IVAR.PPSU IC press fittings.
Can the same spacer be used for a tee and an elbow?
Yes, tees and elbows of the same size are pressed with the same spacer; it only has to be positioned correctly for the fitting type.
Additional parameters
| Category: | installation aids |
|---|---|
| Warranty: | 24 |
| Code: | I0000686 |
| Manufacturer: | IVAR |
| Type: | IVAR.OPM |
| Application: | axial pressing of IVAR.PPSU IC fittings |
| Pipe: | PE-X 10 × 1.3 mm, 20 × 2 mm |
| Tool: | IVAR.A-PRESS |
| Pack size: | 2 pcs |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
