Smart Plug PNI SmartHome SM441R with Dimmer and Signal Repeater for SM400 System

Product detailed description

PNI SmartHome SM441R is a 230 V wall socket through which you can remotely turn on and off lights or small appliances. In addition, it can smoothly adjust the light intensity and can also serve as a signal repeater, which enhances the range of radio devices.

Important: it works only in the PNI SmartHome SM400 system. It communicates with the control unit via radio at 433 MHz (range up to 100 m) and is controlled by the PNI Smart Home app for Android and iOS. It does not operate as a Wi-Fi socket via a home router.

The maximum load is 200 W, the minimum is 7 W. The timer can be set for up to 30 minutes, either by pressing the SET button on the socket or via the app.

Signal Repeater

If you have areas in your home with a weak signal, plug the socket into approximately the halfway point between the control unit and the receiver and activate the repeater function. If you have no dead zones, it is recommended to turn off this function. With multiple repeaters, set a different signal transmission delay for each to avoid mutual interference.

Common Questions

Can I connect a high-power appliance?
No, the limit is 200 W. Use a different type of socket for more powerful appliances.

Does it work without the SM400 control unit?
No, the socket is compatible only with the PNI SmartHome SM400 system.

Technical Specifications