Stainless steel linear drain LINIA, length 60 cm

Product detailed description

The stainless steel linear drain LINIA, 600 mm long, collects and drains water along its entire length. The trough made of AISI 304 steel has a cover thickness of 1.5 mm and its bottom part is 1.2 mm thick; the surface is brushed INOX with pattern.

The LINIA range is available in lengths from 500 to 1000 mm. On this page you will find the 600 mm (60 cm) variant, so please compare the length with the dimensions of your space when making your selection.

Main Features

• Tray dimensions: length 600 mm, width 62 mm, installation depth 52 mm
• Material: stainless steel AISI 304 (cover thickness 1.5 mm, bottom tray 1.2 mm)
• Surface: brushed INOX with pattern
• Sound-dampening spacers in the cover reduce the noise of falling water
• Surrounding flange 2 cm
• 40 mm trap that can be cleaned from above; trap flow rate is 30 l/min
• Drain pipe 40/50 mm and reducer 50/40 mm
• Adjustable feet to set the tray to the desired height

Technical Data

Application

The linear drain is installed into the floor so that water runs into a narrow trough instead of a point drain. The 600 mm length is suitable where water needs to be drained precisely over a 60 cm section; for other areas, choose a different length from the LINIA range.

Installation and Maintenance

The tray is placed on adjustable feet to set its height relative to the finished floor. The drain pipe 40/50 mm includes a reducer 50/40 mm. The floor structure must be adapted to the installation depth of 52 mm. The trap (40 mm) is cleaned from above, so maintenance does not require access from below.

Frequently Asked Questions

How do the different variants of the LINIA range differ?

They differ in length (500, 600, 700, 800, 900 and 1000 mm), and therefore also in weight. This variant is 600 mm long and has a net weight of 2.50 kg.

How is the trap of this drain cleaned?

The 40 mm trap is cleaned from above. The trap flow rate is 30 l/min.

What drain pipe is used with this drain?

The drain pipe diameter is 40/50 mm and the reducer 50/40 mm is used for connection.