Submersible pump 4" IPRO PROFESSIONAL 12/030T - RTS, for boreholes and wells, 400V, 2200W, stainless steel, sand-resistant
Code: PR_113452Related products
Product detailed description
Multi-stage submersible pump 4" IPRO PROFESSIONAL 12/030T has increased resistance to sand and other abrasive substances that may be present in the water. The designation RTS on the submersible pump stands for (Resistance To Sand = resistant to sand). This submersible pump with floating impellers can also be used in new or freshly drilled boreholes, wells, tanks, water reservoirs and collection shafts. It is also suitable for boosting pressure when installed in a distribution pipeline, as well as for domestic or industrial use and for irrigation or water spraying. Hydraulic part of the IPRO PROFESSIONAL 12/030T pump is separated from the motor (the pump is not built as a monoblock) - in the event of a fault, the pump can be easily disassembled. Any repair (carried out at our service centre) need not be expensive and is above all fast, which is a great advantage in the event of a fault. The pump is equipped with thermal protection - a fuse. Submersible pump 4" IPRO PROFESSIONAL 12/030T is also suitable for small and medium-sized fire-fighting stations, or as part of a domestic water system with a submersible pump. Professional pumps of the IPRO PROFESSIONAL range can also be used in continuous operation (24/7), which is also a great advantage over hobby pumps or submersible pumps used mainly for domestic use. Structurally, IPRO PROFESSIONAL pumps are designed to be able to pump water from unusually deep wells or boreholes (up to 150 m) and to deliver the required amount of water reliably over the long term. Materials used: Suction/discharge nozzle: AISI 304 Housing: AISI 304 stainless steel Shaft and rotor: AISI 304 stainless steel Impeller: technologically improved pump-grade noryl Diffuser: reinforced polycarbonate Mechanical seal: Ceramic/SiC/NBR Bearings: NSK Operating conditions: Maximum liquid temperature: 35°C Maximum ambient temperature: 35°C Insulation class: F Operating mode: intermittent and/or continuous Safety: IP68 Maximum number of starts per hour: 30 Motor: oil-cooled Motor speed: 2850 RPMAdditional parameters
| Category: | Submersible water pumps, Professional submersible pumps, Professional submersible pumps |
|---|---|
| Weight: | 20.1 kg |
| Dimensions H x W x D (cm): | 123.6x10.08 |
| Maximum flow rate (l/min): | 300 |
| Pump design - voltage (V): | 400 V |
| Pump head (m): | 67 |
| Supply cable length (m): | 20 |
| EAN: |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
G
Gerald
Gerald
Zvažujem inštaláciu tohto čerpadla do novo vyvŕtanej studne s hĺbkou približne 90 metrov, pričom voda obsahuje zvýšené množstvo jemného piesku – rád by som sa informoval, či je čerpadlo 4" IPRO PROFESSIONAL 12/030T pre takéto podmienky skutočne vhodné, a či jeho konštrukcia s plávajúcimi obežnými kolesami zaručuje spoľahlivú dlhodobú prevádzku aj v tomto prostredí.
A
ATRIA.SK
ATRIA.SK
Áno, toto čerpadlo je priamo navrhnuté na takéto podmienky – označenie RTS znamená Resistance To Sand, teda zvýšenú odolnosť voči piesku a abrazívnym látkam. Na hĺbku 90 metrov nemá problém, konštrukcia zvláda vrty až do 150 metrov. Navyše je vhodné aj do nových, čerstvých vrtov, takže ho môžete pokojne inštalovať hneď po vŕtaní. Pre dlhodobú spoľahlivosť tiež oceníte, že ide o profesionálne čerpadlo určené na nepretržitú prevádzku 24/7.