TYTAN PEX 90° crimp elbow, with external thread, 26 x 3/4"

Product detailed description

The TYTAN PEX 26 x 3/4" elbow with an external thread connects a PEX/AL/PEX pipe of size 26 to a threaded component and at the same time turns the pipe direction by 90°. The 3/4" thread is external, so it is screwed into an element with an internal thread. The fitting is made of nickel-plated brass and comes with a 10-year warranty.

Main Features

• 90° elbow – right-angle connection without bending the pipe
• external 3/4" thread
• size 26 x 3/4": pipe 26, thread 3/4"
• material: nickel-plated brass
• 10-year warranty
• bulk packaging 10/80 pcs

Technical Data

Application and Installation

The elbow is installed on a PEX/AL/PEX pipe of size 26 where the pipe needs to be connected at a right angle to a threaded component. Cut the pipe perpendicularly, clean it from burrs, insert it into the fitting until it reaches the stop, and crimp it using suitable crimping tools. Seal and tighten the thread carefully during installation to avoid damaging the brass body.

Other Sizes in the Range

From the same range with an external thread, sizes 16 x 1/2", 20 x 1/2", and 20 x 3/4" are also available, as well as the variant 26 x 1" with a larger thread. Choose the pipe size according to the existing piping and the thread according to the connection point.

Frequently Asked Questions

For which pipe size is the 26 x 3/4" elbow intended?

For a pipe of size 26; the thread is external, with a size of 3/4 inch.

What are the basic material and warranty details?

The body is made of nickel-plated brass and the product is covered by a 10-year warranty.