TYTAN PEX compression T-piece 20x1/2"Fx20 with internal thread, U and TH jaws
Code: PEX-TYT-Z.T.GW20X1/2Product detailed description
The TYTAN PEX 20x1/2 inch x20 T-piece is a compression fitting made of nickel-plated brass with an internal thread. Two tube outlets have a size of 20 and the branch has a 1/2 inch internal thread, which allows a threaded component to be connected to the piping without the need for an additional transition fitting.
Main Features
- material: nickel-plated brass
- two 20-sized tube outlets on both sides and an internal thread of 1/2 inch
- compatible with U and TH pliers
- 10-year warranty
Technical Data
| Index | PEX-TYT-Z.T.GW20X1/2 |
| Size | 20x1/2 inch x20 |
| Material | nickel-plated brass |
| Pliers | U and TH |
| Warranty | 10 years |
| Collective Packaging [pcs] | 10/80 |
| EAN | 5900308749791 |
Application and Installation
This fitting is used in piping systems made of multi-layer tubes where a branch with a threaded connection is required. Insert the tubes using U or TH pliers after cutting them straight and pushing them in until they reach the stop. Before tightening the fitting, check that the mating thread has the same 1/2 inch size and ensure the thread is properly sealed.
Frequently Asked Questions
What is the size of the tubes that can be crimped to the fitting?
The crimped outlets have a size of 20, as indicated by the marking 20x1/2 inch x20.
What is the collective packaging of this product?
The collective packaging is 10/80 pcs.
Additional parameters
| Category: | PEX/AL/PEX Press Fittings |
|---|---|
| EAN: | 5900308749791 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!