TYTAN PEX T-piece, internal thread 26x3/4"Fx26, "U" and "TH" jaws

Product detailed description

The compression T-piece TYTAN PEX 26x3/4"Fx26 is designed for distribution from PEX/AL/PEX pipes of size 26. Two straight branches are compressed onto the pipe, and the branch is finished with an internal thread of 3/4" (letter F). In the manufacturer's table, it is the largest of the listed dimensions; other T-pieces have pipe sizes of 16 or 20. The material is nickel-plated brass.

What the fitting offers

• nickel-plated brass
• size 26 on both straight branches
• internal thread 3/4" on the branch
• compression with "U" and "TH" jaws
• bulk packaging 10/50 pcs
• 10-year warranty

Technical data

Application

Choose this fitting when you need to create a branch with a threaded connection on a pipe of size 26. Always use jaws with the "U" or "TH" profile during compression and follow the instructions for the compression tool.

Installation

Cut the pipe straight before inserting it into the fitting and check that there are no dirt or damage at the end. After compression, verify that the connection is secure, and only then connect the appropriate component to the branch thread. Seal the thread with suitable sealing material and do not overtighten it.

Frequently asked questions

What does the marking 26x3/4"Fx26 mean?

The first and last number indicate the pipe size on the straight branches, i.e., 26. The middle marking 3/4"F is the internal thread of the branch.

What is the bulk packaging of this T-piece?

In the manufacturer's table, the bulk packaging for code PEX-TYT-Z.T.GW26X3/4 is listed as 10/50 pcs.

Which jaws are used with it?

Jaws "U" and "TH".