TYTAN PEX T-piece, size 20 x 20 x 20

Product detailed description

The compression T-piece TYTAN PEX 20 x 20 x 20 is used to create a branch in the piping system from a PEX/AL/PEX pipe. Each of the three outlets is intended for a pipe with a diameter of 20, making it an even distribution fitting without reduction. It is made of nickel-plated brass and comes with a 10-year warranty.

Main Features

• three compression outlets, each for a pipe with a diameter of 20
• T-shape – dividing the piping into two directions
• material: nickel-plated brass
• 10-year warranty
• bulk packaging 10/50 pcs

Technical Data

Application and Installation

Use this fitting at points where the pipe with a diameter of 20 branches off and the branch should have the same diameter as the main line. Cut the pipes perpendicularly before compression, remove any burrs, and insert them fully to the stop. Then compress the connections using the appropriate compression tool for this system, one outlet at a time, and verify that all are properly secured.

Other Dimensions in the Range

In the range of compression T-pieces you will also find dimensions 16 x 16 x 16 and 26 x 26 x 26. The variant 20 x 20 x 20 is intended for a pipe with a diameter of 20 on all three outlets.

Frequently Asked Questions

For which pipe diameter is the T-piece 20 x 20 x 20 intended?

For a pipe with a diameter of 20, on all three outlets.

What is the warranty period for this fitting?

The warranty is 10 years.