Vaillant electric air preheater 1000 W for recoVAIR 260/4
Code: 0020180800Product detailed description
Vaillant electric air pre-heater 1000 W for recoVAIR 260/4
The electric air pre-heater (manufacturer code 0020180800) is genuine accessory for the Vaillant recoVAIR VAR 260/4 heat recovery unit - a medium-power model of the recoVAIR /4 generation range with a maximum air flow of up to 260 m³/h, suitable especially for family houses with medium air flow requirements. It is an electric heating element (register) with a power of 1,000 W, which is installed directly in the fresh air duct, before it enters the unit's cross-counterflow heat exchanger. Its purpose is not to heat the living spaces of the house, but to protect the heat exchanger itself against freezing at low outdoor temperatures and to allow the unit to operate reliably even during freezing winter days without forced defrosting pauses.
As with the larger VAR 360/4 model, without freeze protection, ice could form in the cold part of the exchanger at low outdoor temperatures, gradually narrowing its channels and reducing air flow. The pre-heater prevents this by slightly warming the incoming outdoor air before it enters the exchanger, with the entire process controlled automatically by the unit's electronics based on the measured outdoor temperature - without any need for user intervention.
Technical characteristics
- Device type: electric air pre-heater (heating register) for duct/unit installation
- Manufacturer order number: 0020180800
- Heating element power: 1,000 W
- Intended for: exclusively for the recoVAIR VAR 260/4 unit (including the "E" variant with enthalpy exchanger)
- Function: protection of the heat exchanger against freezing, year-round operation without defrosting pauses
- Power supply: 230 V AC, connected to the unit's electrical installation according to the installation manual
- Location: integrated into the fresh air supply path, before the heat exchanger
- Control: automatic, based on measured outdoor temperature, controlled by the unit's electronics
- Compatible unit - parameters: VAR 260/4, max. 260 m³/h, nominal range approx. 115-200 m³/h, heat recovery efficiency approx. 85% (EN 13141-7), noise level 45-59 dB(A) depending on power level, unit power consumption 22-170 W
- Country of origin: Germany / EU (Vaillant Group)
- Warranty: 2 years
Why freeze protection is important specifically for the VAR 260/4 model
According to the manufacturer's technical documentation, the recoVAIR VAR 260/4 unit achieves a heat recovery efficiency of approximately 85% (EN 13141-7 methodology), which in practice results in significantly lower ventilation heat losses compared to conventional window opening. However, for the unit to maintain this high efficiency during winter, the heat exchanger must simultaneously remove moisture from the warm exhaust air in the form of condensate. When the outdoor temperature drops below approximately -10 to -15 °C, this condensate risks turning to ice in the colder part of the exchanger, narrowing the channels and reducing air flow.
The 1,000 W electric pre-heater prevents this by raising the temperature of the incoming outdoor air to a safe level before it enters the exchanger. The unit's control electronics measure the current outdoor temperature and switch on the pre-heater only when actually necessary, optimizing electricity consumption compared to continuous operation of the heating element.
Installation and connection
The pre-heater is installed directly into the structure of the recoVAIR VAR 260/4 unit or into the fresh air supply duct just before the unit, exactly according to the procedure in the manufacturer's installation manual. The electrical connection (230 V AC power supply and connection to the control electronics for automatic switching based on outdoor temperature) must be carried out in accordance with applicable electrical standards. We recommend entrusting the installation to a trained technician or an authorized Vaillant service partner, as incorrect fixing of the heating element in the airflow or faulty electrical wiring could jeopardize operational safety or reduce the lifespan of other unit components.
As with other recoVAIR models, we also recommend considering installation of the pre-heater already during the initial installation of the unit, especially in locations with regular winter frosts below -10 °C. Additional installation after the unit has been put into operation is possible, but requires re-intervention in the already installed unit structure and its electrical wiring.
Compatibility
This 1,000 W pre-heater is intended exclusively for the recoVAIR VAR 260/4 model, including its variant with an enthalpy heat exchanger (designation "E"). For the more powerful VAR 360/4 model, we offer a separate 1,500 W pre-heater (code 0020180799), and for the smaller VAR 150/4 model a 600 W pre-heater (code 0020180801) - the power and mechanical dimensions of the element are always dimensioned exactly to the air flow of the specific unit, so the components cannot be interchanged between models.
The pre-heater can be freely combined with other accessories for the VAR 260/4 unit - for example the CO2 sensor VAZ CO/1, the VAZ S4/1 controller, the higher F9/G4 filtration class, the enthalpy heat exchanger, or the self-sealing condensate siphon, as each of these components addresses a different functional area of the system.
Comparison of pre-heaters in the recoVAIR /4 range
| Unit model | Max. air flow | Pre-heater power | Order number |
| recoVAIR VAR 150/4 | 150 m³/h (at 130 Pa) | 600 W | 0020180801 |
| recoVAIR VAR 260/4 (this product) | 260 m³/h | 1,000 W | 0020180800 |
| recoVAIR VAR 360/4 | 360 m³/h | 1,500 W | 0020180799 |
The VAR 260/4 model represents the mid-range category of the recoVAIR /4 range both in terms of maximum air flow and required pre-heater power - it is a suitable choice for family houses with medium living space, where the smaller VAR 150/4 model might not be sufficient in capacity, but the full power of the largest VAR 360/4 model is not yet needed.
When a pre-heater is really necessary
We recommend considering the electric pre-heater especially for installations in locations with regular occurrence of outdoor temperatures below -10 to -15 °C in winter, as well as in buildings with higher indoor air humidity (households with a larger number of occupants, a bathroom with a bathtub, or a laundry drying room), where the amount of water vapor in the exhaust air is higher and the risk of condensate formation in the exchanger increases accordingly. Rough estimate of operating costs: since the pre-heater operates intermittently, only when there is actual risk of freezing, its real average consumption during the heating season is significantly lower than the rated power of 1,000 W - the exact value depends on the climatic region and the number of frosty days in the season.
Maintenance and care
The electric pre-heater has no moving mechanical parts and requires no special maintenance from the user during normal operation - its switching is fully controlled by the recoVAIR unit's electronics based on the measured outdoor temperature. As part of the regular annual service of the unit (usually carried out together with filter replacement), we recommend having technicians check the functionality and electrical connection of the pre-heater, ideally before the start of the heating season. Neglected replacement of the unit's inlet filters may also indirectly affect the thermal balance around the pre-heater, so we recommend adhering to filtration service intervals as well.
Why choose this pre-heater
This electric pre-heater is a genuine accessory directly from the manufacturer of the recoVAIR VAR 260/4 unit, developed and tested to precisely match the performance parameters and dimensions of the given unit. It therefore guarantees correct mechanical compatibility, trouble-free communication with the control electronics, and the preservation of warranty conditions for the entire controlled ventilation system with heat recovery - unlike non-original or universal third-party solutions, which lack this certainty.
Impact on acoustic comfort and smooth operation
In addition to freeze protection, the electric pre-heater also has an indirect but noticeable effect on the smoothness of operation of the entire controlled ventilation system. Units without a pre-heater usually temporarily reduce fan power or switch to forced defrosting cycles when there is a risk of exchanger freezing, during which the character of air flow and the noise level of the unit change. With a pre-heater, such fluctuations practically do not occur, and the VAR 260/4 unit can operate smoothly at the set power level even during freezing days, without unexpected changes in noise or ventilation intensity.
Recommendations for designers and installation companies
When designing a controlled ventilation system with the VAR 260/4 unit, we recommend taking the electric pre-heater into account already at the design stage of the building's electrical installation - it is necessary to plan for a 230 V AC power supply to the unit's installation location and correct dimensioning of the circuit protection according to the 1,000 W power consumption. We also recommend recording information about the installed pre-heater in the project documentation for future service technicians, so that they can verify the functionality of this system component during regular annual maintenance. In locations with more extreme winter conditions, we recommend consulting a Vaillant representative or our technical department regarding the optimal setting of the pre-heater's switching threshold temperature.
Relation to other optional components of the VAR 260/4 unit
Due to its medium air flow, the VAR 260/4 model is often combined with other optional recoVAIR components - for example an enthalpy heat exchanger (improves winter comfort by transferring some of the moisture from the exhaust air to the incoming air along with heat, preventing excessive air drying during the heating season), a higher F9/G4 filtration class for households in urban or otherwise burdened environments, or a self-sealing condensate siphon for maintenance-free condensate drainage. The electric pre-heater can be freely combined with all of the above components, as each addresses a different functional area of the controlled ventilation system.
Frequently asked questions
Does the pre-heater heat rooms?
No, its purpose is to protect the recoVAIR unit's heat exchanger against freezing at low outdoor temperatures, not to heat living spaces.
Which recoVAIR model is this pre-heater intended for?
Exclusively for the VAR 260/4 model (including the "E" variant with enthalpy exchanger). Separate pre-heaters with different power ratings (600 W and 1,500 W respectively) are available for the VAR 150/4 and VAR 360/4.
How is the pre-heater controlled?
Automatically, by the unit's control electronics, which measure the outdoor temperature and switch the heating element on or off as needed.
Is the pre-heater a mandatory part of every installation?
No, but it is recommended especially in areas with regular winter frosts below -10 to -15 °C and higher indoor air humidity.
Can the pre-heater be installed additionally later?
Yes, but we recommend entrusting this modification to a trained technician, as it involves intervention in the unit's air duct system and electrical wiring.
What is the supply voltage?
The heating element is powered by 230 V AC voltage, connected to the unit's electrical installation according to the manufacturer's installation manual.
What is the warranty on this pre-heater?
We provide a standard 2-year warranty, the same as for other accessories and parts for Vaillant recoVAIR units.
Does the pre-heater affect the unit's noise level?
Not directly - the noise level of the VAR 260/4 unit (45-59 dB(A) depending on power level) is mainly determined by fan speed. The pre-heater, on the other hand, contributes to smoother operation without fluctuations caused by forced defrosting, which may indirectly also have a positive effect on perceived acoustic comfort.
Do I need to modify my home's electrical installation when ordering a pre-heater?
Yes, it is necessary to plan for a 230 V AC power supply to the unit and correct dimensioning of the circuit protection according to the 1,000 W power consumption - we recommend including this requirement in the building's electrical installation project already.
Noise level and consumption of the VAR 260/4 unit by power level
| Parameter | Value |
| Maximum air flow | 260 m³/h |
| Nominal operating range | approx. 115 - 200 m³/h |
| Noise level (depending on power level) | 45 - 59 dB(A) |
| Unit fan power consumption | 22 - 170 W |
| Heat recovery efficiency (EN 13141-7) | approx. 85% |
| Unit dimensions (H × W × D) | 885 × 595 × 631 mm |
| Unit weight | approx. 41.0 kg |
| Diameter of duct connections | Ø 180/210 mm |
| Diameter of condensate connection | Ø 19 mm |
The electric pre-heater has no direct effect on these noise and consumption values of the unit - its purpose is exclusively to protect the heat exchanger against freezing. We provide this information here as an addition for a better understanding of the VAR 260/4 unit's parameters, for which this pre-heater is intended, and for comparison with other models in the recoVAIR range when choosing the most suitable configuration for your project.
Summary
The 1,000 W electric air pre-heater is an important addition to the Vaillant recoVAIR VAR 260/4 unit for households in areas with colder winters, where it protects the heat exchanger against freezing and ensures uninterrupted year-round operation of the controlled ventilation with heat recovery system. As a genuine accessory directly from the manufacturer, it guarantees precise compatibility with the unit and preservation of warranty conditions for the entire system. If you are unsure whether a pre-heater is necessary for your specific project, we are happy to advise you by phone or e-mail - simply provide the recoVAIR unit model, the location, and the approximate humidity load of the household (number of occupants, presence of a bathroom with a bathtub or a laundry drying room), and we will recommend whether a pre-heater is suitable for your specific project or whether operation without it is sufficient.
Additional parameters
| Category: | Accessories for Vaillant recoVAIR units |
|---|---|
| Warranty: | 2 years |
| Type: | Electric preheater (heating coil) for air |
| Power: | 1 000 W |
| Power supply: | 230 V AC |
| Control: | automatic, based on outside temperature |
| Function: | prevents freezing of the heat exchanger |
| Country of origin: | Germany / EU |
| Brand: | Vaillant |
| Warranty: | 2 years |
| Application: | recoVAIR VAR 260/4 (including variant E) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The Vaillant Group is synonymous with heating and hot water preparation, placing particular emphasis on quality, reliability and user comfort. Its heating technology products are present in more than 100 countries around the world. The group unites the brands Vaillant, Saunier Duval, AWB, Bulex, DemirDöküm, Glow worm, Hermann Saunier Duval and Protherm. Each of these brands has extensive experience in the production of heating equipment, as most of them have been active in this segment for more than 80 years. With its 140 years of market presence, the brand Vaillant is among the largest and most significant. It has long been a market leader and a pioneer in the development and innovation of heating technologies in Europe. The Vaillant Group has an extensive network of sales representatives and thousands of satisfied customers around the world.
The extensive portfolio of the Vaillant Group includes modern heating technologies that are energy-saving, efficient and contribute to environmental protection. Thanks to a wide range of products and models, every customer can find exactly what they need here. The range includes wall-hung and floor-standing boilers, hot water storage tanks or electrical appliances. In the market of wall-hung boilers, the company is even number one in Europe with a 26 percent market share. The Vaillant Group is not specialized only in the development and production of boilers; its product portfolio also includes technologies that use renewable energy sources, such as solar systems or the most modern heat pumps and air conditioners. It also offers recovery or cogeneration units or zeolite heat pumps to users.
Vaillant Group thinks ahead every day and offers individual solutions for every need and type of energy. Its success is also based on research and development, which always takes place in line with the wishes of customers. The company's research and development department is among the largest and above all the most creative departments in this segment. The team of developers is constantly working on new devices and technological systems that are increasingly easy to operate and already meet the demands of tomorrow. Whether it is about energy solutions of the future or about the best way to use fossil fuels, the company Vaillant Group tries to anticipate new trends and to be always one step ahead of others. Proof of this is the registration of up to 100 new patents every year. In the field of production, the company places the greatest emphasis on achieving the highest quality of boilers, which represents perfection in every detail.
The Vaillant Group has its presence in most countries of the world. Slovakia is no exception, where the company Vaillant Group Slovakia, s. r. o. is located, representing the brands Vaillant and Protherm. Heating equipment of the Vaillant Group is produced in seven production plants, two of which are located on our territory. These factories employ more than 1,300 people in total. The production plant Protherm Production with its headquarters in Skalice specializes in the production of electric and floor-standing boilers for all brands belonging to the Vaillant Group. It can also boast its own research and development center, which is among the most modern in Europe. The second production plant in Slovakia is Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces modules for wall-hung boilers for the entire group.
History of the company Vaillant
The history of the company Vaillant goes back to the year 1874, when it was founded by Johann Vaillant in Remscheid, Germany. Since then, the company Vaillant has been a leader in the field of heating and ventilation technologies.
History of the company Vaillant
1874 Plumber Johann Vaillant founded the company.
1894 Patented for the invention of a gas water heater with a "closed system" design.
1899 Registered company logo, the Easter Bunny.
1905 Development of a wall-mounted water heater, patented under the designation "Geyser".
1924 Development of a wall-mounted boiler for heating.
1955 Production of the millionth appliance after the end of the Second World War.
1960 Production of electrical appliances begins.
1967 Development of a combined wall-mounted boiler.
1974 11 million appliances sold since 1974.
1992 Establishment of subsidiary companies – in the Czechoslovak Republic, Hungary, Poland and Turkey.
1993 Separation of Czechoslovakia leads to the creation of a separate sales representation in Slovakia.
1999 Anniversary, 125th anniversary of the founding of the company, 40 million appliances sold in the entire history of the company.
2001 The Vaillant Group is formed, covering eight significant manufacturers of heating equipment in Europe, including the boiler manufacturer Protherm in Slovakia.
2003 The Vaillant Group production plant in Skalice specializes in the production of floor-standing boilers also for other brands belonging to the VG group.
2004 Vaillant Group opens a new production plant in Trenčín, Slovakia, for the production of hydraulic groups for wall-hung boilers.
2009 10,000,000 modules for heating equipment produced at the VG Trenčín plant.
Easter Bunny in the logo - intended for the success of the company
Pink dwarfs and cute animals stand around and admire the miracle of the egg. Johann Vaillant is fascinated by the scene and decides to buy both the picture and the copyright. For Vaillant, this means the establishment of its brand and an extremely successful story.
Very distinctive brand profile
Since 1899, the motif has adorned all products, catalogs and brochures. In a few short years, Vaillant built an excellent reputation that spread throughout Germany and even beyond its borders. Vaillant gave its logo clear lines and outlines. "The Bunny in the Egg" remains the central theme, but the word "Vaillant" is added.
Many Germans know that the Vaillant Bunny belongs to a company based in North Rhine-Westphalia. Moreover: more than 70% of all Germans have heard of the company Vaillant. In Austria and the Netherlands, the company achieves similar results for its image.
Sustainability
As a forward-looking, family-owned company, we accept special responsibility for the environment, for our employees and for society. We are convinced that economic success, sustainable and profitable growth are inseparably linked to a commitment to social and ecological standards.
In order to fulfill this commitment, we are committed to carrying out our activities in a sustainable manner within the strategic S.E.E.D.S. Program (Sustainability in Environment, Employees, Development & Products and Society). The definition of these areas of interest is based on a comprehensive understanding of sustainability, in which we also take into account key issues of our core activities.
