Vaillant rubber pads for free installation of an outdoor unit on a flat floor and roof
Code: 0020250226Related products
Product detailed description
Vaillant Dämpfungssockel – Rubber bases for free installation of the outdoor unit (60 cm, 2 pcs)
Original Vaillant damping bases serve for acoustic and mechanical separation (de-coupling) of the aroTHERM heat pump outdoor unit from the base when installed freely on a flat, compacted surface – concrete foundation, terrace, compacted ground or flat roof. The set includes 2 bases with a length of 600 mm, which are placed transversely under the body of the outdoor unit instead of a classic concrete foundation or console.
Purpose and principle of operation
An air-to-water heat pump generates vibrations from the compressor and fan during operation. When the metal frame of the unit is in direct contact with a rigid base (concrete, paving), these vibrations are transferred into the building structure as structural noise (buzzing, thumping transmitted through walls). The rubber/elastomeric inserts in the base body function as a flexible damping element – they absorb mechanical vibrations and significantly reduce noise transmission to the surroundings, which is important especially when installed near living rooms, bedrooms or adjacent properties, where noise limits according to current legislation must be observed.
Technical parameters
- Dimensions of one base: length 600 mm, depth 140 mm, height 95 mm
- Number of pieces in the package: 2 (forming a pair for one unit)
- Package weight: approx. 8.47 kg
- Material: galvanized/stainless steel structure with built-in rubber damping elements
- Application: free installation on a flat, load-bearing base (ground, terrace, roof)
- No additional concrete foundation is required – the bases transfer the load directly to the base via the extended base plate
Compatibility
The bases are intended for outdoor units of the aroTHERM plus series (VWL .../6 A, .../5 AS), aroTHERM Split with hydraulic station and with the uniTOWER AS module, and aroTHERM plus with uniTOWER plus. Before ordering, we recommend verifying the exact model and generation of the unit, as Vaillant uses different sets of bases for different sizes and generations of heat pumps (see also the smaller version "Small rubber bases" for more compact units).
Installation
The installation is simple and does not require special tools – the bases are placed on a flat, compacted and drained base at the specified spacing corresponding to the width of the unit base, the unit is placed on them and, if necessary, secured with screws through the holes in the base. It is important to ensure that the base is really flat (deviation max. a few mm), otherwise the damping elements are unevenly loaded, which reduces their lifespan and damping efficiency. A slight slope of the base away from the unit is recommended to prevent the accumulation of rainwater and melting ice/snow under the unit.
Why choose original accessories
Non-original or improvised solutions (e.g. ordinary rubber pads from household use) do not have a defined load capacity or stiffness of the damping element adapted to the weight and vibration profile of a specific unit. The original Vaillant Dämpfungssockel is designed and tested directly by the manufacturer to meet the declared acoustic parameters of the unit stated in the technical documentation (e.g. sound power level LWA), and its use is also a prerequisite for warranty recognition in the case of complaints related to excessive vibration transmission.
Frequently asked questions
Is a concrete foundation required next to the bases? No, on a flat and sufficiently load-bearing base (minimum compaction class corresponding to the unit load, usually 40–130 kg) the bases replace the foundation.
Can they also be used on a roof? Yes, provided the roof structure is dimensioned for point loading and the roof covering/waterproofing is protected against mechanical damage and possibly also anti-fall protection for service access is ensured.
Is special coating or corrosion protection required? The structure is made of galvanized/corrosion-protected material intended for year-round outdoor operation, additional protection is not necessary.
Do the bases also reduce vibrations transmitted to the cooling/heating piping? The bases solve the mechanical separation of the unit from the base; for piping connections, it is recommended to combine with flexible connection kits (see our other aroTHERM accessories), which dampen vibrations spreading through the piping.
Packaging and delivery
The delivery includes 2 bases including the necessary mounting material. We recommend ordering them together with the outdoor unit so that the installation company can carry out the complete installation in one visit.
Operational and service recommendations
After the first year of operation, we recommend checking the condition of the rubber damping inserts in the bases during the annual service inspection of the heat pump – especially any possible compression, cracking or displacement of the unit from its original position due to subsidence of the base. In areas with high soil moisture or near irrigation systems, it is advisable to occasionally check whether water is not pooling directly under the bases, which could accelerate corrosion of the metal parts even with a quality surface treatment.
Related accessories
To complete the free installation of the outdoor unit on flat ground, we recommend combining these bases with a suitable connection kit for bottom or side installation (depending on the direction of the route to the house) and with a condensate drain heater, if long-term frost is common in the area. For smaller units, an alternative is our smaller set "Small rubber bases (4 pcs)", and in areas with high snow cover, we recommend considering an elevated mounting base with a 40 cm lift instead of the bases.
Warranty and technical support
The product is covered by a warranty period of 24 months according to the current terms and conditions of the e-shop. We recommend keeping the purchase receipt and, in the case of heat pump installation, also obtaining an installation/commissioning protocol from the installation company, which is an important document in the case of a system claim. In the case of questions about the suitability of the choice of bases for a specific unit model, do not hesitate to contact us before ordering.
Shipping and packaging
Due to weight and dimensions, the product is classified as an atypical shipment – delivery is carried out by courier service with pallet/large package transport, payment is possible in advance by bank transfer. When ordering together with the outdoor unit, we recommend choosing a single delivery date, so that the installation company can carry out the installation in one visit.
Comparison of installation methods for the outdoor unit
Vaillant offers three basic methods of attaching the aroTHERM outdoor unit, from which the investor chooses together with the installation company according to the site layout, type of façade and climatic conditions of the location:
- Free installation on rubber bases (this product) – the simplest and fastest solution, does not load the perimeter wall of the house, suitable for flat compacted ground, terrace or roof with sufficient load capacity. No concrete foundation or intervention into the façade is required.
- Wall console – saves space on the site, the unit is elevated above the ground, but requires verified wall load capacity and professional fastening (mechanical or chemical anchors according to the type of façade).
- Elevated mounting base (40 cm) – combines the advantages of free installation with protection against snow accumulation, suitable especially for locations with regular high snow cover.
In all three cases, the key common denominator is the quality damping of the unit using rubber/elastomeric damping elements that prevent the transfer of compressor vibrations into the building structure – it is precisely this function that the bases described in this product perform.
Installation procedure step by step
- Mark out and prepare a flat, drained and sufficiently load-bearing base at the planned installation site of the outdoor unit.
- Check the spacing and orientation of the bases according to the dimensions of the base of the specific unit model (see the manufacturer's installation instructions for the given VWL type).
- Place both bases on the base so that they are parallel and in one plane (check with a spirit level).
- Mount the outdoor unit on the bases and, if necessary, mechanically secure it through the prepared holes in the base.
- Check that the unit is stable and level in all directions, and if there are any irregularities in the base, correct them before final fixing.
- Connect the piping, electrical installation and condensate drain according to the project documentation and put the unit into operation according to the manufacturer's instructions.
Výkurovacia jednotka
Táto výkurovacia jednotka je navrhnutá pre rýchlu a efektívnu distribúciu tepla v bytových a priemyselných priestoroch. Je vybavená pokročilým systémom regulácie teploty a môže byť jednoducho integrovaná do existujúcich systémov vykurovania.
- Typ: Výkurovacia jednotka
- Výkon: 10 - 50 kW
- Regulácia: Digitálna regulácia teploty
- Kapacita: 200 - 1000 l
Kľúčové vlastnosti:
- Integrovaný systém odstránenia vzduchu
- Možnosť pripojenia viacerých kotlov
- Prispôsobenie sa rôznym typom palív
- Minimálna náročnosť na údržbu
Špecifikácie:
- Rozmery: 800 x 600 x 1200 mm
- Hmotnosť: 80 kg
- Maximálna teplota: 95°C
- Minimálna teplota: 20°C
Pre viac informácií alebo objednávku kontaktujte náš servisný tím cez kontaktný formulár alebo telefónne číslo +421 900 123 456.
Additional parameters
| Category: | Heat Pump Accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 5 kg |
| Type: | Rubber base for free installation of the outdoor unit |
| Application: | Installation on flat floor and roof |
| Compatibility: | For models from the aroTHERM range |
| Number of pieces: | 2 pieces |
| Length: | 60 cm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
About the company
The Vaillant Group is synonymous with heating and hot water preparation, placing particular emphasis on quality, reliability and user comfort. Its heating technology products are present in more than 100 countries around the world. The group unites the brands Vaillant, Saunier Duval, AWB, Bulex, DemirDöküm, Glow worm, Hermann Saunier Duval and Protherm. Each of these brands has extensive experience in the production of heating equipment, as most of them have been active in this segment for more than 80 years. With its 140 years of market presence, the brand Vaillant is among the largest and most significant. It has long been a market leader and a pioneer in the development and innovation of heating technologies in Europe. The Vaillant Group has an extensive network of sales representatives and thousands of satisfied customers around the world.
The extensive portfolio of the Vaillant Group includes modern heating technologies that are energy-saving, efficient and contribute to environmental protection. Thanks to a wide range of products and models, every customer can find exactly what they need here. The range includes wall-hung and floor-standing boilers, hot water storage tanks or electrical appliances. In the market of wall-hung boilers, the company is even number one in Europe with a 26 percent market share. The Vaillant Group is not specialized only in the development and production of boilers; its product portfolio also includes technologies that use renewable energy sources, such as solar systems or the most modern heat pumps and air conditioners. It also offers recovery or cogeneration units or zeolite heat pumps to users.
Vaillant Group thinks ahead every day and offers individual solutions for every need and type of energy. Its success is also based on research and development, which always takes place in line with the wishes of customers. The company's research and development department is among the largest and above all the most creative departments in this segment. The team of developers is constantly working on new devices and technological systems that are increasingly easy to operate and already meet the demands of tomorrow. Whether it is about energy solutions of the future or about the best way to use fossil fuels, the company Vaillant Group tries to anticipate new trends and to be always one step ahead of others. Proof of this is the registration of up to 100 new patents every year. In the field of production, the company places the greatest emphasis on achieving the highest quality of boilers, which represents perfection in every detail.
The Vaillant Group has its presence in most countries of the world. Slovakia is no exception, where the company Vaillant Group Slovakia, s. r. o. is located, representing the brands Vaillant and Protherm. Heating equipment of the Vaillant Group is produced in seven production plants, two of which are located on our territory. These factories employ more than 1,300 people in total. The production plant Protherm Production with its headquarters in Skalice specializes in the production of electric and floor-standing boilers for all brands belonging to the Vaillant Group. It can also boast its own research and development center, which is among the most modern in Europe. The second production plant in Slovakia is Vaillant Industrial Slovakia in Trenčianske Stankovce, which produces modules for wall-hung boilers for the entire group.
History of the company Vaillant
The history of the company Vaillant goes back to the year 1874, when it was founded by Johann Vaillant in Remscheid, Germany. Since then, the company Vaillant has been a leader in the field of heating and ventilation technologies.
History of the company Vaillant
1874 Plumber Johann Vaillant founded the company.
1894 Patented for the invention of a gas water heater with a "closed system" design.
1899 Registered company logo, the Easter Bunny.
1905 Development of a wall-mounted water heater, patented under the designation "Geyser".
1924 Development of a wall-mounted boiler for heating.
1955 Production of the millionth appliance after the end of the Second World War.
1960 Production of electrical appliances begins.
1967 Development of a combined wall-mounted boiler.
1974 11 million appliances sold since 1974.
1992 Establishment of subsidiary companies – in the Czechoslovak Republic, Hungary, Poland and Turkey.
1993 Separation of Czechoslovakia leads to the creation of a separate sales representation in Slovakia.
1999 Anniversary, 125th anniversary of the founding of the company, 40 million appliances sold in the entire history of the company.
2001 The Vaillant Group is formed, covering eight significant manufacturers of heating equipment in Europe, including the boiler manufacturer Protherm in Slovakia.
2003 The Vaillant Group production plant in Skalice specializes in the production of floor-standing boilers also for other brands belonging to the VG group.
2004 Vaillant Group opens a new production plant in Trenčín, Slovakia, for the production of hydraulic groups for wall-hung boilers.
2009 10,000,000 modules for heating equipment produced at the VG Trenčín plant.
Easter Bunny in the logo - intended for the success of the company
Pink dwarfs and cute animals stand around and admire the miracle of the egg. Johann Vaillant is fascinated by the scene and decides to buy both the picture and the copyright. For Vaillant, this means the establishment of its brand and an extremely successful story.
Very distinctive brand profile
Since 1899, the motif has adorned all products, catalogs and brochures. In a few short years, Vaillant built an excellent reputation that spread throughout Germany and even beyond its borders. Vaillant gave its logo clear lines and outlines. "The Bunny in the Egg" remains the central theme, but the word "Vaillant" is added.
Many Germans know that the Vaillant Bunny belongs to a company based in North Rhine-Westphalia. Moreover: more than 70% of all Germans have heard of the company Vaillant. In Austria and the Netherlands, the company achieves similar results for its image.
Sustainability
As a forward-looking, family-owned company, we accept special responsibility for the environment, for our employees and for society. We are convinced that economic success, sustainable and profitable growth are inseparably linked to a commitment to social and ecological standards.
In order to fulfill this commitment, we are committed to carrying out our activities in a sustainable manner within the strategic S.E.E.D.S. Program (Sustainability in Environment, Employees, Development & Products and Society). The definition of these areas of interest is based on a comprehensive understanding of sustainability, in which we also take into account key issues of our core activities.
