Ventilation unit with heat recovery SMARTY 3X P – ceiling-mounted, DN 160, 397 m³/h – SPECIAL OFFER

Product detailed description

What it is used for

SMARTY 3X P (code IVU300P) is a central ventilation unit with heat recovery for apartments, family and passive houses. It extracts stale air and excess moisture and replaces it with fresh outside air, which is preheated in the heat exchanger by the heat of the exhaust air – the house is ventilated without opening windows and with minimal heat loss.

The unit is mounted under the ceiling and, due to its height of only 324 mm, offers many installation options. The version with an enthalpic heat exchanger has the code IVU300PE (SMARTY 3X PE).

Construction and equipment

• plastic counterflow plate heat exchanger with a thermal efficiency of 84.8 % (data according to EU Regulation 1254/2014), energy efficiency class A for average climate
• EC fans with variable speed control – power consumption at maximum flow 182 W, reference specific power index SPI 0.28 W/(m³/h), sound power level 44 dB(A)
• summer bypass with a servomotor for 100 % bypass of the heat exchanger and night cooling
• Coarse 65 % (G4) filters on the supply and exhaust side, size 225 × 195 × 25 mm; for outside air, it is possible to use an ePM1 70 % (F7) filter
• enclosure made of galvanized steel with powder coating in white color RAL 9016 (corrosion resistance C3), thermal and acoustic insulation made of EPP with thickness 30 mm, tightness class A1

Control and accessories

The integrated control board miniMCB measures the temperature of the outside, supplied and extracted air and controls the fans, bypass and external components (preheater, reheater, air regulators). It offers three manual modes, intensive ventilation (boost), a timer program, night cooling, a mode for fireplaces and intelligent anti-frost protection; it is possible to connect a CO2 sensor (IVAR.CO2) or a humidity sensor.

The controller is not part of the unit – a wall controller (IVAR.TCP, IVAR.ST-SA, IVAR.STOUCH) or the interface IVAR.MB-GATEWAY, which allows control from a PC and via the IVAR.SMARTYAIR app on a smartphone or tablet, must be ordered separately. An electric preheater IVAR.EKA (1.2 kW) is available for preheating the outside air, and an independent reheater IVAR.EKA NI (1.2 kW) with control GRGT034 is available for reheating the supplied air.

Installation

The dimensions of the unit (length × width × height) are 1228 × 690 × 324 mm, weight 53 kg. It is powered from a single-phase network 230 V / 50 Hz, total power / consumption is 0.23 kW / 1.75 A. The unit operates inside the building at ambient temperature 5 to 40 °C and ambient humidity up to 70 %; without anti-frost protection, it can process outside air from -2 °C. Anti-frost protection works with an imbalance of flows and can create negative pressure in the house – for devices that take air from the room (fireplace, boiler), the manufacturer recommends turning it off and using a preheater. It is not installed in living rooms without additional noise insulation and is not intended for pools or saunas. Installation, electrical connection and maintenance must be carried out only by a qualified technician and the unit must be grounded.

Technical parameters

Frequently asked questions

What is included in the delivery and what needs to be ordered separately?
The unit is delivered with mounting accessories – four anti-vibration pads, cover plugs, a key and an output pipe G3/8. The controller (IVAR.TCP, IVAR.ST-SA, IVAR.STOUCH or interface IVAR.MB-GATEWAY) and ventilation ducts must be ordered separately.

Where should the unit not be installed?
Only in living rooms with additional noise insulation and never in pools, saunas or similar spaces. The unit is intended for indoor use with ambient temperature 5 to 40 °C and humidity up to 70 %.

How often are the filters changed?
The manufacturer recommends changing them every 3 to 4 months or sooner according to the warning on the controller. Coarse 65 % (G4) filters with dimensions 225 × 195 × 25 mm are used, for outside air also ePM1 70 % (F7); the unit must not be operated without filters.

Does the unit need preheating of outside air?
Without anti-frost protection, SMARTY 3X P operates at outside air temperatures from -2 °C. For colder periods, an electric preheater IVAR.EKA (1.2 kW) is added to it.