Press nipple IVAR.MP 5736 15x20/2 – transition from ALPEX pipe 20x2 to Cu / C-STEEL pipe Ø 15 mm
Code: 512115MPCProduct detailed description
The IVAR.MP 5736 nipple in size 15x20/2 (code 512115MPC) links two press systems: ALPEX 20x2 multilayer pipe on one side and copper or IVAR.C-STEEL carbon steel pipe with a 15 mm outside diameter on the other. Both sides are joined by pressing, so no threaded adapter is needed.
- ALPEX 20x2 side: press jaws with B, BE, TH, F, H, R or U profile
- Cu / C-STEEL Ø 15 mm side: press jaws with M, V or SA profile
- max. operating pressure PN 10, max. temperature +100 °C
- nickel-plated brass CW617N body, stainless steel sleeve, EPDM seal
The nipple is used wherever ALPEX pipe meets pressed copper or steel pipe in the same installation. Press each side with jaws of the correct profile and size; before inserting, cut the ALPEX pipe square, calibrate and deburr it.
Technical data
| Code | 512115MPC |
| Manufacturer | IVAR |
| Type | IVAR.MP 5736 |
| Product type | press nipple ALPEX – Cu / C-STEEL |
| Size | 15x20/2 |
| ALPEX side | 20x2 mm |
| Cu / C-STEEL side | Ø 15 mm |
| Press jaws – ALPEX side | B, BE, TH, F, H, R, U |
| Press jaws – Cu / C-STEEL side | M, V, SA |
| Max. pressure / temperature | PN 10 / +100 °C |
| Material | nickel-plated brass CW617N, stainless sleeve, EPDM seal |
Frequently asked questions
Which pipes does the 15x20/2 nipple connect?
ALPEX 20x2 multilayer pipe on one side and copper or IVAR.C-STEEL pipe with a 15 mm outside diameter on the other.
Which press jaws are needed?
The ALPEX side is pressed with jaws of B, BE, TH, F, H, R or U profile, the copper or steel side with M, V or SA profile – always in the size matching the pipe.
What are the operating limits of the joint?
The nipple is rated for an operating pressure of up to 10 bar (PN 10) and a temperature of up to +100 °C. The body is nickel-plated brass CW617N, the sleeve stainless steel and the seal EPDM.
Additional parameters
| Category: | straight press couplings - copper |
|---|---|
| Warranty: | 2 years |
| Fitting type: | nipple |
| Pipe diameter: | 15 mm, 20 mm |
| Material: | nickel-plated brass |
| Connection type: | press fitting |
| Code: | 512115MPC |
| Manufacturer: | IVAR |
| Type: | IVAR.MP 5736 |
| Product type: | press nipple ALPEX – Cu / C-STEEL |
| Size: | 15x20/2 |
| ALPEX side: | 20x2 mm |
| Cu / C-STEEL side: | Ø 15 mm |
| Press jaws – ALPEX side: | B, BE, TH, F, H, R, U |
| Press jaws – Cu / C-STEEL side: | M, V, SA |
| Max. pressure / temperature: | PN 10 / +100 °C |
| Material: | nickel-plated brass CW617N, stainless sleeve, EPDM seal |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.