Industrial manifold/collector set IVAR.KSA 035 with balancing and shut-off valves – 6/4" × 3/4", 6 outlets
Code: KSA0035B06Product detailed description
The IVAR.KSA 035 set with 6 outlets (code KSA0035B06) distributes heating water to 6 loops of a hot-water surface (underfloor) heating system in industrial buildings. The DN 40 flow and return bodies are made of drawn CW617N brass bars, heat-treated to eliminate internal stress and the risk of cracking.
Set components
- flow manifold with balancing fittings – double micrometric adjustment with position memory
- return collector with shut-off valves and manual caps, ready for electrothermal actuators
- ball valves with unions for connection to the heating system (red and blue lever)
- automatic air vent, 2 fill/drain valves, plugs and mounting brackets
Technical data
- set connection 6/4" female thread, outlets 3/4" female thread to ISO 228/1
- outlet centre distance 50 mm
- max. operating pressure 10 bar, max. operating temperature +120 °C, EPDM seals
The set is supplied pre-assembled and without a cabinet; for the 6-outlet version the data sheet specifies cabinet size P2/N2. The loop pipes are connected using adaptors with 3/4" male thread, which are ordered separately. Flush the whole system thoroughly before commissioning.
Technical data
| Code | KSA0035B06 |
| Brand | IVAR |
| Type | IVAR.KSA 035 |
| Number of outlets | 6 |
| Nominal size | DN 40 |
| Set connection | 6/4" female thread |
| Outlets | 3/4" female thread |
| Outlet centre distance | 50 mm |
| Max. operating pressure | 10 bar |
| Max. operating temperature | +120 °C |
| Material | brass CW617N, EPDM seal |
| Cabinet size (not included) | P2/N2 |
| Application | hot-water surface (underfloor) heating |
Frequently asked questions
Is the installation cabinet included in the set?
No, the set is supplied without a cabinet. For the 6-outlet version the data sheet specifies cabinet size P2/N2; the IVAR.P-KLASIK cabinet is an optional accessory.
How are the heating loop pipes connected?
The outlets have a 3/4" female thread. The pipes are connected using suitable adaptors with 3/4" male thread, which are not included.
How are the loops balanced?
With the balancing fitting in the manifold body: after unscrewing the cap, use a 5 mm Allen key to set the number of turns specified in the design. The fitting remembers the set position even after closing.
Can electrothermal actuators be fitted to the collector?
Yes, the collector's shut-off valves are ready for electrothermal actuators. They are fitted with manual caps at the factory.
Additional parameters
| Category: | IVAR.KSA 035 - industrial collector/manifold assembly with valves |
|---|---|
| Warranty: | 2 years |
| Type: | manifold + collector set |
| Manifold material: | brass |
| Number of circuits: | 6 |
| Manifold connection: | 6/4" |
| Code: | KSA0035B06 |
| Brand: | IVAR |
| Type: | IVAR.KSA 035 |
| Number of outlets: | 6 |
| Nominal size: | DN 40 |
| Set connection: | 6/4" female thread |
| Outlets: | 3/4" female thread |
| Outlet centre distance: | 50 mm |
| Max. operating pressure: | 10 bar |
| Max. operating temperature: | +120 °C |
| Material: | brass CW617N, EPDM seal |
| Cabinet size (not included): | P2/N2 |
| Application: | hot-water surface (underfloor) heating |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.