Customer support:0917 133 662info@atria.sk
    Prices in:
    Home / Heating technology / Professional Heating / heat pumps / accessories for IVAR.HP ATHENA heat pump series

    accessories for IVAR.HP ATHENA heat pump series

    Accessories for IVAR.HP ATHENA heat pumps make it easier to position and hydraulically connect the units. The 400 and T-type stands are used to set up the unit, while the connection unions are intended for the ATHENA TOTAL outdoor and indoor units and for the ATHENA STANDARD outdoor unit, where IVAR.TER-PS converts from 2× 1" F to Cu 28 mm.

    Bestsellers

    Anti-freeze valve IVAR.VAG 5/4" – 10 bar, -30 °C to 90 °C
    In stock at supplier
    5702501
     (–20 %)
    71,93 €
    (58,48 € excl. VAT)
    Anti-freeze valve IVAR.VAG 1" – 10 bar, -30 °C to 90 °C
    In stock at supplier
    5702500
     (–20 %)
    67,90 €
    (55,20 € excl. VAT)
    Connection fittings IVAR.TER-PS for ATHENA STANDARD outdoor unit – 2× 1" F × Cu 28 mm
    In stock at supplier
    IHP086U567AS
     (–20 %)
    19,38 €
    (15,76 € excl. VAT)

    Product sorting

    4 items total

    List of products

    Nezámrzný ventil IVAR.VAG 1" – 10 bar, -30 °C až 90 °C
    –20 %
    Anti-freeze valve IVAR.VAG 1" – 10 bar, -30 °C to 90 °C
    In stock at supplier
    55,20 € excl. VAT
    67,90 €

    IVAR anti-freeze valve with 1" connection from the heat pump accessory range....

    5702500
    Nezámrzný ventil IVAR.VAG 5/4" – 10 bar, -30 °C až 90 °C
    –20 %
    Anti-freeze valve IVAR.VAG 5/4" – 10 bar, -30 °C to 90 °C
    In stock at supplier
    58,48 € excl. VAT
    71,93 €

    IVAR anti-freeze valve with 5/4" connection from the heat pump accessory range....

    5702501
    Vykurovacia technika Pripojovacie šróbenie - pre vonkajšiu a vnútornú jednotku ATHENA TOTAL
    –20 %
    Connection fitting - for outdoor and indoor unit ATHENA TOTAL
    In stock now (1 pcs)
    58,40 € excl. VAT
    71,83 €

    Connection fitting - for outdoor and indoor unit ATHENA TOTAL

    IHP086U567AH
    Detail
    –20 %
    Connection fittings IVAR.TER-PS for ATHENA STANDARD outdoor unit – 2× 1" F × Cu 28 mm
    In stock at supplier
    15,76 € excl. VAT
    19,38 €

    Set of two brass compression adapters IVAR.TER-PS for connecting 28 mm copper pipe...

    IHP086U567AS

    Listing controls

    4 items total

    Accessories for IVAR.HP ATHENA series heat pumps:

    Connection fitting, flexible hoses, temperature sensor, heating tape, expansion module, room sensor, buffer vessel, stand, wall bracket, separating intermediate heat exchanger, connection cover, hot water circulation kit, frost-protection valve 

    Frequently Asked Questions

    • What types of accessories are available? Connection fittings, stands (400 and T-type), connection covers, HZB-1/HZB-2 anti-freeze heating cables, EM3 expansion modules and room sensors for GENESIS control.
    • What is the HZB heating cable used for? It protects the outdoor unit's condensate drain from freezing; the number in the designation indicates the length of the heating section (1 m or 2 m).
    • Is a stand required for every installation? No, only for a free-standing installation of the outdoor unit on the ground - a different type of bracket is used for wall mounting.
    Vytvořil Shoptet | Design Shoptak.cz.